Page 1 of 1
Aluminum tube
Posted: February 22nd, 2017, 11:49 pm
by Steve Perry
I have off cuts available typically 18 inches long, 2 sizes nominal 7/8 and 1 inch o/d, wall thickness is .07 and .08 inches respectively. The tube is anodised and the 1 inch is de-finned, ( the internal seam has been removed ).
Free to good home and can bring some to Haydock and other shows that I go to
Re: Aluminum tube
Posted: February 23rd, 2017, 8:58 am
by IAN TURNEY-WHITE
Steve ,planning a large motorglider , if you could spare two of each side , I would be gratefull .Will be at Haydock
mANY THNKS iAN tURNEY-wHITE
Re: Aluminum tube
Posted: February 23rd, 2017, 1:54 pm
by Cary Bailey
Steve, I would like 4 lengths of each size please, I am attending Haydock so can collect from there.
Thank you
Cary
Re: Aluminum tube
Posted: February 23rd, 2017, 10:07 pm
by Dave Lowe
Hi Steve, Many thanks for your kind offer, I will also be at Haydock can I have 4 lengths of each please.
Regards
Dave................
Re: Aluminum tube
Posted: February 24th, 2017, 8:32 am
by Steve Vodrey
Thanks Steve.
I could do with one length of each please.
I will be at Haydock Park displaying a Lancaster.
Re: Aluminum tube
Posted: February 25th, 2017, 5:54 pm
by Cary Bailey
Steve, could I add to my request for some of this tube? Dave Whiston is working in Dubai at present and cannot log onto the site, he has asked if I could request that he would like 2 lengths of each size tube please.
Thank you
Cary
Re: Aluminum tube
Posted: March 3rd, 2017, 8:21 pm
by Steve Perry
I also have some 5/8 and 1 1/4 od tube.
The next thing is how to distribute it, I remember walking around Gaydon with co2 fire extinguishers trying to find the folk that wanted them, suggestions or someone exhibiting who could be the pick up point ?
Due to the distance involved I am disguising things as a weekend trip to Blackpool for her indoors, so if the weather turns foul then we may not go
It is also worth mentioning that the 7/8 and 1 inch tube are very loose fit in each other, just in case anyone was thinking they would be a perfect fit
Re: Aluminum tube
Posted: March 3rd, 2017, 10:39 pm
by Dave Lowe
I don't know Haydock Park but would think there's a named snack bar we could all meet at, at a pre arranged time say 11am. might even have a coffee together. Perhaps DJ could help us with this info. Thats my 5 pennyworth any other ideas.
Re: Aluminum tube
Posted: March 5th, 2017, 9:36 pm
by DAVE JOHNSON
Dave---their is a Café area with seating in the middle Trade hall---hope this is of help
Re: Aluminum tube
Posted: March 5th, 2017, 9:47 pm
by Dave Lowe
Thanks Dave thats just the sort of thing I was thinking of, I hope the rest can agree to the suggestion.
Re: Aluminum tube
Posted: March 5th, 2017, 11:13 pm
by Steve Perry
Ok, that will do, 11am in the cafe weather permitting, I will be the one with a sack of ally tube
Still plenty available
Re: Aluminum tube
Posted: March 6th, 2017, 10:38 pm
by Dave Lowe
Fine Steve I'll look out for the sack,
See you there,
Dave.....................
Re: Aluminum tube
Posted: March 8th, 2017, 4:09 pm
by Steve Morris
Steve, if you still have them, could I have 4 of each length. Cary will pick them up for me.
Steve
Re: Aluminum tube
Posted: July 6th, 2017, 5:59 pm
by Steve Perry
Can take some of the above to Cosford if anyone needs any, FOC as before
Re: Aluminum tube
Posted: July 6th, 2017, 9:32 pm
by Steve Morris
Steve, I'll take a couple of each if that's ok, I'll be at Cosford with the DP
Re: Aluminum tube
Posted: July 7th, 2017, 12:00 am
by Steve Rickett 2333
Hi Steve,
Could i get two of each size please? Can collect at cosford.
Cheers
Steve
Re: Aluminum tube
Posted: July 7th, 2017, 7:21 am
by Cary Bailey
Hi Steve, I too will have some more pieces please, 4 if possible. Any longer tubes would be appreciated. Thanks
Cary
Re: Aluminum tube
Posted: July 12th, 2017, 6:35 pm
by Steve Perry
To save wandering around looking for everyone I will drop the tube into the LMA stand.
Re: Aluminum tube
Posted: July 13th, 2017, 9:46 am
by Steve Morris
Cheers Steve
Re: Aluminum tube
Posted: July 13th, 2017, 8:59 pm
by Steve Rickett 2333
Perfect, thank you very much.