Search found 10 matches

by Frank Skilbeck
July 24th, 2018, 10:05 pm
Forum: General Discussion Topics
Topic: CAA Permission For Model Fying Over 400ft
Replies: 7
Views: 257

Re: CAA Permission For Model Fying Over 400ft

Well done to all involved.
by Frank Skilbeck
July 14th, 2018, 8:14 pm
Forum: LMA Events 2018
Topic: Cheddar Fly-in 2018
Replies: 7
Views: 459

Re: Cheddar Fly-in 2018

Had a cracking days flying on Thursday 12th July, thanks to all involved.
by Frank Skilbeck
June 27th, 2018, 8:21 pm
Forum: Technical Help required
Topic: Engine standoffs
Replies: 3
Views: 193

Re: Engine standoffs

Dave, Thanks model is a Seagull Maxilift with a Pitts style silencer so making an engine mounting box (to go round the rear carb too) isn't that straight forward. At the moment it has the standard 60mm standoffs with the bulkhead "packed" out with additional Ply plates so the exhaust clear...
by Frank Skilbeck
June 25th, 2018, 9:46 pm
Forum: Technical Help required
Topic: Engine standoffs
Replies: 3
Views: 193

Engine standoffs

Looking for some 75mm standoffs for a DLA 32cc, any recommendations where I can buy some.
by Frank Skilbeck
March 28th, 2018, 6:51 pm
Forum: Technical Help required
Topic: DLA 32cc Pitts Silencer
Replies: 0
Views: 487

DLA 32cc Pitts Silencer

Looking for a Pitts style exhaust for my DLA 32cc, any recommendations (and any to avoid!), thanks
by Frank Skilbeck
March 15th, 2018, 2:10 pm
Forum: Technical Help required
Topic: Spitfire flaps
Replies: 8
Views: 743

Re: Spitfire flaps

Nothing like the models above, but if your transmitter allows it then put the elevator compensation on an adjuster so you can adjust the amount of elevator mix 3 mistakes high!
by Frank Skilbeck
January 19th, 2018, 6:59 pm
Forum: Technical Help required
Topic: Prop bolting orientation
Replies: 2
Views: 255

Re: Prop bolting orientation

Paul, thanks for that, so it's basically position the prop for hand starting, much appreciated.
by Frank Skilbeck
January 19th, 2018, 8:45 am
Forum: Technical Help required
Topic: Prop bolting orientation
Replies: 2
Views: 255

Prop bolting orientation

Sorry if this is covered elsewhere, just using my first multi-bolt prop (4 bolt on a DLA 32) with a wooden prop, is there a preferred bolt layout, should the holes be at 45 deg to the prop blades or 0/90 degrees. I looked on line and could find pictures of both, so thought I would ask.
by Frank Skilbeck
January 2nd, 2018, 12:50 pm
Forum: LMA Events 2018
Topic: Cheddar Fly-in 2018
Replies: 2
Views: 502

Re: Cheddar Fly-in 2018

Ron, do you need to pre-book if you are planning to pop down for the odd day or is it OK just to turn up, thanks
by Frank Skilbeck
January 1st, 2018, 1:44 pm
Forum: For Sale or Wanted
Topic: Grab a Bargin
Replies: 8
Views: 1776

Re: Grab a Bargin

are the 7 off Savox servos still available?

Go to advanced search