Search found 151 matches

by BRIAN RAWCLIFFE
August 30th, 2024, 3:41 pm
Forum: Technical Help required
Topic: Advice sought for fuel pump for a Moki 180cc Radial
Replies: 7
Views: 1099

Re: Advice sought for fuel pump for a Moki 180cc Radial

Nigel. Sorry but I do not know what walbro carb is used, but I think you will find that the filter Is the same for all, and the offer still stands. I bought my 150 new in 2007, 50-1 mix, 4.8v ignition battery, no pump, 26"x 16" prop, perfect every time. Enjoy it. Brian..
by BRIAN RAWCLIFFE
August 20th, 2024, 9:40 am
Forum: Technical Help required
Topic: Advice sought for fuel pump for a Moki 180cc Radial
Replies: 7
Views: 1099

Re: Advice sought for fuel pump for a Moki 180cc Radial

MOKI RADIAL. Nigel, before you do anymore testing of your engine there is one thing you must do if only to eliminate that it could be the starting problem. It will require the engine to be removed from the airframe, then you will have access to the carb, remove the carb and take off the fuel input c...
by BRIAN RAWCLIFFE
June 18th, 2024, 6:06 pm
Forum: General Discussion Topics
Topic: Redmarshall
Replies: 2
Views: 625

Re: Redmarshall

Stuart, thank you for those few kind words you are correct, I am older than 42. To be precise I am 91.76 years old. and still flying jets etc. Looking forward to seeing you and other L.M.A. members this weekend. Many thanks. Brian. L.M.A. 042. BMFA/SMAE 4683.
by BRIAN RAWCLIFFE
June 18th, 2024, 8:12 am
Forum: General Discussion Topics
Topic: Redmarshall
Replies: 2
Views: 625

Redmarshall

Any update on the condition of the flying field for this weeks show. Is it on or off..Many Thanks Brian. LMA. 042.
by BRIAN RAWCLIFFE
October 12th, 2023, 9:33 am
Forum: General Discussion Topics
Topic: heat proof paint.
Replies: 3
Views: 1401

Re: heat proof paint.

I have covered the underneath of the rear fuselage with self adhesive aluminium sheet, problem solved. Many thanks Brian.
by BRIAN RAWCLIFFE
September 8th, 2023, 1:06 pm
Forum: General Discussion Topics
Topic: heat proof paint.
Replies: 3
Views: 1401

heat proof paint.

What is the best method to prevent the paint blistering on the fuse underneath of a bottom mounted turbine model. Many Thanks Brian.
by BRIAN RAWCLIFFE
April 28th, 2023, 12:25 pm
Forum: For Sale or Wanted
Topic: 26"x16" prop.
Replies: 1
Views: 1058

26"x16" prop.

Dose anyone have an unwanted 26"x16"Menz prop. would prefer undrilled, but if drilled it must be for a Moki 150 radial with one pair of holes dead in line with the blades, so it will fit my spinner cutouts. sadly I wont be at Cosford on Sunday because my right foot is waiting to have stitc...
by BRIAN RAWCLIFFE
October 27th, 2022, 3:31 pm
Forum: General Discussion Topics
Topic: Elvington Show
Replies: 12
Views: 4136

Re: Elvington Show

Stewart, just letting you know that the new wing is complete ready for glassing. We had to miss Gaydon because Sean had covid, and both myself and Paul were suffering with heavy colds. ps. I celebrated my 90th birthday two day's ago. Brian..
by BRIAN RAWCLIFFE
September 22nd, 2022, 4:47 pm
Forum: General Discussion Topics
Topic: Sad News
Replies: 3
Views: 2016

Re: Sad News

So sorry to hear about Dave, he spent many hours with us in Pauls caravan. RIP Dave. Brian. Paul and Tony.
by BRIAN RAWCLIFFE
August 23rd, 2022, 2:31 pm
Forum: General Discussion Topics
Topic: Elvington Show
Replies: 12
Views: 4136

Re: Elvington Show

Ian. I totally agree with you. My transmitter is a Futaba 12G, and for 14 years the choke switch has been set on switch SA which is a 3 position switch and a short lever. However one flight last year the engine was not at it's best, so I landed ok, and found that the choke switch was in the middle p...
by BRIAN RAWCLIFFE
August 22nd, 2022, 1:19 pm
Forum: General Discussion Topics
Topic: Elvington Show
Replies: 12
Views: 4136

Elvington Show

Elvington LMA show last week. Firstly I would like to thank everyone who helped to retrieve my Hawker Tempest after the loss of power which resulted in the model landing in the rough grass area, severely damaging the wings. Two pilots I would like to mention are Stewart Clifford, and Mick Butler, ma...
by BRIAN RAWCLIFFE
July 31st, 2022, 7:33 am
Forum: For Sale or Wanted
Topic: 26"x16" prop.
Replies: 2
Views: 1085

Re: 26"x16" prop.

Thanks for the reply Lee, but I no longer require the props. Many Thanks Brian.
by BRIAN RAWCLIFFE
July 16th, 2022, 11:42 am
Forum: General Discussion Topics
Topic: Alex Whittaker, photographer extreme, R.I.P
Replies: 5
Views: 2469

Re: Alex Whittaker, photographer extreme, R.I.P

As Paul said above, what a shock. Alex sat with myself and Paul Crawshaw at the Pontefract vintage flying event thee weeks ago and he was on his best. Our condolences to his family, he will be very much missed in the hobby.
by BRIAN RAWCLIFFE
July 16th, 2022, 10:35 am
Forum: Technical Help required
Topic: Moki 215cc tuning or...?
Replies: 9
Views: 4538

Re: Moki 215cc tuning or...?

Frank. The problem could be that you are using far too much oil. I have been flying my Moki 150cc for years in my Hawker Tempest using Bell- Ray H1-R 100% synthetic 2T at 50-1, and in hundreds of flights it has never stopped in the air. Give it a try, 32-1 is for running in. Best of luck, Brian.. LM...
by BRIAN RAWCLIFFE
July 6th, 2022, 1:16 pm
Forum: For Sale or Wanted
Topic: 26"x16" prop.
Replies: 2
Views: 1085

26"x16" prop.

Does anyone have a Menz or Fiala 26"x16" prop, if used drilled for a Moki 150 radial that is surplus to your requirements. Many Thanks. Brian.
by BRIAN RAWCLIFFE
April 11th, 2022, 4:21 pm
Forum: For Sale or Wanted
Topic: Nose Leg
Replies: 0
Views: 741

Nose Leg

Dose anyone have a sprung nose leg, the type used on Mick Reeves Super Reaper, or Tony Nijhauis Retrojet. With or without wheel. Many Thanks.. Brian.
by BRIAN RAWCLIFFE
February 24th, 2022, 4:48 pm
Forum: For Sale or Wanted
Topic: KRICK FOURNIER RF7 KIT
Replies: 4
Views: 2047

Re: KRICK FOURNIER RF7 KIT

Dave, PM now received, see you on Sunday.
by BRIAN RAWCLIFFE
February 24th, 2022, 10:44 am
Forum: For Sale or Wanted
Topic: KRICK FOURNIER RF7 KIT
Replies: 4
Views: 2047

Re: KRICK FOURNIER RF7 KIT

Dave, as yet no PM received. Brian.
by BRIAN RAWCLIFFE
February 21st, 2022, 1:56 pm
Forum: For Sale or Wanted
Topic: CHIPMUNK CANOPIES
Replies: 1
Views: 1141

CHIPMUNK CANOPIES

For sale, 2. 1/4 scale canopies for the Mike Smart Chipmunk. These are the canopies produced and supplied by Robin Woodhead
Price £25 each. Can bring to Cosford on Sunday. Brian Rawcliffe LMA. 042.
by BRIAN RAWCLIFFE
February 21st, 2022, 1:45 pm
Forum: For Sale or Wanted
Topic: KRICK FOURNIER RF7 KIT
Replies: 4
Views: 2047

KRICK FOURNIER RF7 KIT

For Sale. Krick Fournier RF7 1/5 scale kit, 1880 mm wing span. The kit is complete only opened to check contents. These are no longer produced. Was 216 eur new. asking price £70 ono. Unfortunateley the instructions are in German, although you can translate on the internet. Can bring to Cosford on Su...

Go to advanced search