I have covered the underneath of the rear fuselage with self adhesive aluminium sheet, problem solved. Many thanks Brian.

What is the best method to prevent the paint blistering on the fuse underneath of a bottom mounted turbine model. Many Thanks Brian.

Dose anyone have an unwanted 26"x16"Menz prop. would prefer undrilled, but if drilled it must be for a Moki 150 radial with one pair of holes dead in line with the blades, so it will fit my spinner cutouts. sadly I wont be at Cosford on Sunday because my right foot is waiting to have stitc...

Stewart, just letting you know that the new wing is complete ready for glassing. We had to miss Gaydon because Sean had covid, and both myself and Paul were suffering with heavy colds. ps. I celebrated my 90th birthday two day's ago. Brian..

So sorry to hear about Dave, he spent many hours with us in Pauls caravan. RIP Dave. Brian. Paul and Tony.

Ian. I totally agree with you. My transmitter is a Futaba 12G, and for 14 years the choke switch has been set on switch SA which is a 3 position switch and a short lever. However one flight last year the engine was not at it's best, so I landed ok, and found that the choke switch was in the middle p...

Elvington LMA show last week. Firstly I would like to thank everyone who helped to retrieve my Hawker Tempest after the loss of power which resulted in the model landing in the rough grass area, severely damaging the wings. Two pilots I would like to mention are Stewart Clifford, and Mick Butler, ma...

Thanks for the reply Lee, but I no longer require the props. Many Thanks Brian.

As Paul said above, what a shock. Alex sat with myself and Paul Crawshaw at the Pontefract vintage flying event thee weeks ago and he was on his best. Our condolences to his family, he will be very much missed in the hobby.

Frank. The problem could be that you are using far too much oil. I have been flying my Moki 150cc for years in my Hawker Tempest using Bell- Ray H1-R 100% synthetic 2T at 50-1, and in hundreds of flights it has never stopped in the air. Give it a try, 32-1 is for running in. Best of luck, Brian.. LM...

Does anyone have a Menz or Fiala 26"x16" prop, if used drilled for a Moki 150 radial that is surplus to your requirements. Many Thanks. Brian.

Dose anyone have a sprung nose leg, the type used on Mick Reeves Super Reaper, or Tony Nijhauis Retrojet. With or without wheel. Many Thanks.. Brian.

Dave, PM now received, see you on Sunday.

Dave, as yet no PM received. Brian.

For sale, 2. 1/4 scale canopies for the Mike Smart Chipmunk. These are the canopies produced and supplied by Robin Woodhead
Price £25 each. Can bring to Cosford on Sunday. Brian Rawcliffe LMA. 042.

For Sale. Krick Fournier RF7 1/5 scale kit, 1880 mm wing span. The kit is complete only opened to check contents. These are no longer produced. Was 216 eur new. asking price £70 ono. Unfortunateley the instructions are in German, although you can translate on the internet. Can bring to Cosford on Su...

For sale. My Mitsubishi Ki-15. The full specifications can be found on page 14 of the LMA journal issue 141,also a revue by Alex Whittaker on page 110 of the April 2018 RCM&E. The model is built to 1/4 scale, it spans 120" and weighs 36.5 lbs. It is powered by a Zenoah 80 twin which I conve...

I had known Derek for over 50 years as a fellow model enthusiast, and he was one of the best. As well has his wonderful models, he was well known for his mechanical conversions for advance/retard ignition systems on petrol engines, pre electronic day's. As Keith say's, a true LMA type. We will miss ...

Simon, my KI-15 flys wonderful with a Zenoah 80 twin, and a 26"x10" prop. Best of luck with the sale. PS. I have not flown it for over two years, so I am thinking of putting it up for sale. Brian.

Has anyone got an unwanted manifold for a MOKI/MACKAY 30 CC. petrol engine. Used is ok. Many Thanks. Brian.