Pat, just sent you pm re Canopy. Bob.

SEAFURY FB11. Built some years ago from a Chiltern Models imported semi kit containing a glass/epoxy fuz., cowl, and plans for wings and tailplane. 87 inch wingspan one piece wing covered in glass cloth etc. Mixture of Springair and Robart retracts with sequenced inner doors. Mostly Hitec servos. Ze...

My much flown Glen's Maule needs a new home. 92 inch version with Mackay 45. All servos and battery etc. Good condition for its age with only a few minor scuffs to show for the use I have had from it. Would make excelent glider tow. Located in East Sussex but can take to Nationals, Much Marcle or Bi...

Hi Mick,

No pm received!

Bob

Some engines and a Balsa USA Pup for your consideration. DLE30 with (on-board) electric start £200.00 OS GT55 with exhaust N.I.B. £350.00 SATO FA450R3 (3 CYLINDER) GLOW with exhausts N.I.B. £600.00 MOKI 210 with exhaust and back plate mount £45.00 MOKI 135 with exhaust and back plate mount £40.00 EM...

Hi Rob,
Probably right. I have to hope they are really as the option is the tx. The upside is lots of spare gears for MG225's though.
Robin

Many thanks for all the replies chaps. Re Rob B's question. It may do it once and then be OK for for a few switch on/off's and then do it again. I noticed that they sometimes hover about the center before settling down. I have replaced them when I found them faulty, usually on the workbench, new out...

I have been a keen user of Hitec servos but I have now had three MG225 develop a worrying fault. From new, out of the box, connected up for the first time, on three different models, the servo cycles from end to end. It might settle after a few seconds and appear OK but! I have switched my Tx to the...

DLA32 piston and cylinder. New in box. NO ring (I can supply address of a supplier). These parts are suitable for the current production model only. Will not fit models 3 years or older without machining. £35.00 plus postage at cost. Bob Hart 01892 852137. robindhart@btinternet.com Will be going to ...

WANTED. SPRING AIR RETRACTS OR PARTS. I think they are 700 series. 90 deg. Cylinder measures 2 inches long. O.D. 3/4 inch and the ram is probably 5/8 inch. The (pintal?) bit the oleo fits into accepts a 1/2 inch oleo and the leg retracts parallel to the cylinder. The part I really need is the pintal...

KRAFT SUPERFLY. I believe the real thing was a home constructed aeroplane designed and built by a modeler. This model was drawn up and started quite a few years ago, not by me, and just needs someone to finish it off. Conventional materials throughout. Five (standard servos fitted but probably not u...

Price reduction. Now £1300.oo

Still for sale. Use contact details for any more info.

January sale, now reduced to £1300.oo. Selling on behalf of a friend. FLY EAGLE BAE HAWK 1/5 SCALE.Suffered slight damage in a landing accident which has been repaired but requires painting. Comes with air retracts, wheels with brakes, exhaust tube and some servos. Model can be seen in Crowborough, ...

Just read the spring Journal. Another very good issue. It was however very sad to hear about Andy and Joan. Andy was a friend I only ever saw when we attended the same shows but it was always like meeting a long lost brother. I will miss him. There was an award, a turbine blade, highly polished, mou...

Hi Dave,

Yes, you could put me down for that. My alternative plan was to "linger about" before setting up and put myself at the back or end of the lines.

Cheers, Bob Hart

Is it just me? Recently received my booking forms back for Easter at East Kirkby (thanks John) and read through the notes for on site camping. Bearing in mind the happenings last year, a good idea. What brought back some memories for me though was the mention of Generators. I, because of work and di...

Gentlemen, I am in the process of converting my Futaba FF12 from 35meg to the required 2.4 for the shows. I shall be using the Futaba FAAST system. I seem to remember that when 2.4 started up there was a worry that it required 6v flight packs or they were certainly recommended. Have we moved on or i...

Sounds promising. Putting my money where my mouth is I'll be at EK and with a spitfire,

Robin 1853

I'm sure many will have heard that this year is the annaversary of the first flight of the Spitfire. Seventy five years. It might be a good to have a "Spitfire" slot at the shows this year. I believe last year was a Battle of Britian annaversary and as such there was a slot at the Rufforth...