Dualsky 50cc to 60cc equiv electric motor and dualsky 130a speed controller no bec

All in fully working order
Reason for sale is prefer petrol

Setup is nearly £475 new... asking £250 for quick sale..

Hi Guys, Proud to present something iv been working on for a while. This is my new 1300mm Slick 540 Kit, Wingspan - 1300mm Length - 1270mm Weight - 1350g - 1500g Motor - Overlander T3548/05 Servos - Savox 0256 Battery - 3s or 4s 2200mah lipo Kit Included Fibreglass Cowl, Canopy & Uc * Wheels * A...

Are you the Gordon Tarling who used to run Hacker in the UK?

administration works like this. in the interest of the business they will try to sell the whole to a new buyer, if unsuccessful they will break the business into smaller viable chunks. but ultimately if no buyer is found. its only worth is its assets. so they will sell off to get most for creditors ...

Hi all.
I know its another aerobatic. But thought i would let you all know that my 65% pitts challenger 2 had its maiden flight on friday in 20mph winds.

All went really well

https://youtu.be/rqBWJaE1250

Few bits for sale. Mainly electric motors i have gained over the years.
All used... but never crashed!
Make sensible offers
Match boxes.. £25 each
100a hobby wing speed controller £40
60a hobby wing speed controller £20
Overlander t4260/06 £25
Scorpion 4035/380 £70
All ono

Ups and dpd are ok its a question of not whoes best but who isnt the worst they all have issue and all loose stuff. I know believe me. My hermes work like this. Parcels are sent by waggon to local depots as on our trading estate. Then it is descended on by couriers who use their own cars to deliver ...

Im afraid to say.. But if it is we will be charged for over 20kg models... We have 2 choices.... Like it or lump it.. Its not really up for discussion is it? If people aspire to build large models, they understand the huge costings involved, So what is another cost on top to do something you love......

I thought Tony Hooper was our liaison officer with CAA. or am i missing something here. Surely after all that blurb has been issued there will be a few points that have to be discussed at committee level and decisions being made. I don't see the point of posting 13 pages of blurb as its the same as ...

Have a look at flying giants. Im not seeing foamies on there and thats an equivelant source for modelers but maybe you have hit on the point that should be muted. The lma bang on at how to tempt younger people but as of yet no real success a few family but thats the lot Maybe its because we dont tal...

I started a build thread on my 55% CHALLENGER I RECIEVED absolutely no comments not one the same thread on flying giants i had 530 comments. Rcmf 200 and finally high alpha 120 or so. As previously stated no one is intetested the forum is so insular only a few use it . Non of the committe do except ...

£9 a meter x 600mm wide. Versus £18 metre x 1.5 mertes wide. you do math

Easy. Done it many times. Oracover is a small part of its owners Oracle. Oracle are world leaders in all vinyl media,specifically for your needs cast wrapping vinyl. All Oracover colours are also available in cast wrap plus 100 more different finishes and colours. It's 1.5 m wide and as long as you ...

Well as you know Dad and I are quite anal about our preparation. but on this occasion a £6 spark plug let me down. you just don't expect one to unwind itself still on the plug cap and hanging there out of the engine. I hadn't had any warning or any problems up to that point. Flight was all OK then a...

Due to the overwhelming response This model has had and almost crashing the LMA website due to the amount of posts and support we have received, ,( Yeh Right, Its not a WW1 OR a WW2 Aircraft) Thought i would at least post a picture of the finished plane.

Thanks for all the support LMA

So this is as far as we have got.
LMA Inspection - Passed.
16 x JR 8911 Awaiting install - Tick
ZDZ 250, NEARLY READY TO ORDER.
weight - 62 lbs ( only 3lbs over..... if we went for the zdz 210 as originally thought, we would have been under 60 LBS )

now on to moulds for cockpit and canopy.

So here is the model all ready for LMA Inspecion .. Took 2 months to get to this point so far due to work commitments.

Since the Design was completed within a few weeks, we started to laser cut all parts and start the build.

From autocad, i moved the model in to solidworks to sketch parts, and make sure all the model goes together before laser cutting all parts

At long marston Last Year, i was asked by 4 people if i would be doing a slightly smaller version of my 68% Challenger 2, To which i replied at some point. Since then, i sold my christen eagle ( Left me in September) and i will be needing a smaller 50% Ish Model. So 2 months ago in my spare evenings...