ALBERTROS D5 - ARAZONA KIT THIS IS BEING SOLD FOR A FRIEND AND ALL COMMUNICATION MUST BE DONE THROUGH THE VENDOR Mr STAN FORKINGS. PLEASE CONTACT Tell: 01982 551661 Powys, Mid Wales LD2 3SN Ill health forces Sale, Sensible offers around £750.00 ALBERTROS D5 - ARAZONA KIT comes with Spare paint, Whee...

Here's More of the Kit........

In essence the only addition here will be the side rails 2 per side

Hi all, Well Iv not exactly been sat on my hands these last few weeks, but looking at ways of operating the Intercooler Doors on the P-47 Now I have listened to what you have all said in every regard, particularly with weight, So....! I decided to make and trial a mock set of doors and so far so goo...

Oh... And these.....!

Looks like iv got my work cut out.....!



Meisters New lower Cowl chin/Air Splitter "Much better now...."

Someone looks very pleased with his new acquisitions.....

Well look what arrived on Monday of this week..... :D Cockpit 01 (800x600).jpg The 1/5 Scale Full Ready Made Cockpit for the P-47 Plus Side panels, I just hope that I can do it justice....? Cockpit 1 (800x600).jpg Cockpit 2(800x600).jpg The detail and quality is first class I have to say Cockpit 3 ...

Morning all, Its been a busy week at work and not a lots been done, I did manage to get some building done though and I fitted the Actuator for the Sliding Canopy as you can see in the pictures above, but a great deal of my time has been spent scratching my head.... Why....? Iv read and seen a great...

Thanks again Phil,

Just out of interest I assume that the spitfire canopy has been given a frame....?

If so did you do this or was that part of that particular kit..?

Hi Dave, Thanks for the response it partly goes along with my thinking, My biggest query is whether or not I have to have the front and the rear Pinned/Held to the rails at both the front and back, or if its Pinned/Held at the leading edge of the Canopy and then Pinned/Held at a point past half way...

Hi all I need your help again.....? I have a 30cm Brass Canopy Rail which is as near as dam it is half the length of the Canopy. In order for the Canopy to open, Realistically I'm going to need a 40cm rail "Is this Correct please :shock: " If one of you has done this before and you can he...

Side rails loosely placed while assessing the job





As you can see the actuator comes with a very comprehensive fitting pack

Firgelli Actuators... and Sliding Canopy's... I have opted to fit a sliding Canopy to the P-47 I will be operating it with one of these little fellows 140mm of travel and operates just like a servo so can be plugged straight in to your receiver. The L16-R is the big brother of our L12-R series and ...

Its still going on in my head in regards to constructing and building a silencer for my ZDZ 112cc twin :idea: P1010016 (800x600).jpg P1010017 (800x600).jpg I am now starting to shape the Exhaust Doors by laminating 0.8mm Ply and 1.5mm Balsa and holding in shape over my garage fire extinguisher to g...

In order to prevent myself having the same problems as some others have had with removing the tail wheel after construction a service hatch has been fitted over the tail wheel to allow access in the event of there being a problem at a later stage ;) P1010011 (800x600).jpg P1010012 (800x600).jpg the...

Here is an old LED I had hanging around in the garage, perfect shape and size and realistic looks P1010006 (800x600).jpg P1010007 (800x600).jpg P1010008 (800x600).jpg But look how bright it is..... : :roll: P1010009 (800x600).jpg Bring in the answer .. 8-) P1010010 (800x600).jpg

P1010001 (800x600).jpg In the Dark Bellow is an example of the quality and brightness of the LED;s from Braincube With the garage light on P1010002 (800x600).jpg Here is what I started with in terms of a landing light, this one is my trial and is painted silver in the centre P1010003 (800x600).jpg ...