Steve--that does sound better---it could be worth asking John Mac to ask Multiplex for a spec sheet[i think he has dealings with them?],we could then circulate around the other inspectors for future reference--but in the meantime,if you are sure there is no common point that could fail between the t...

Steve--i would also be concerned about there wording---i havnt seen one yet,but before i would accept it in a over 20 model,i would want a spec sheet from the manufacturers to make sure that there are two completeley seperate receiver/battery systems,with no common link that could fail---this is the...

Dave---just looked at your pics,and yes ,you are doing it right,the locator is tied into the structure,and as you have seen around the 2009 events,the one i have is built the same,and i have stress tested on many occasions--a little bit more than the mild aerobatics that the plan recommends---the ai...

]Spent several hours today jigging up the second wingpanel---then aligned to first panel to check for alignment---will spend the rest of this week adding spars etc

Since last Sunday,when our new guys took over the website,We have logged just undet 4750 hits on the front page alone---not bad for the first week---plus we now have 500 people registered on the forum---the upgrade is ongoing with lots of new features to be added in the next few weeks-----

Have had a rest from the fuselage today,started planking the tailcone,and spent the rest of time building the first wing panel.This is a complex shape,with under camber/reflex/and washout built in,so plenty of time was taken jigging it up on the workshop floor [way too big for any of my benches].Jus...

Ah but simon---he did say thhe Victor carried more bombs ,but Dave did say the Vulcan was a cracking display aircraft---which is what we do with them---so ,i rest my case

Yes please Rob--let have some pics !!!

Since 1994,my 1/7th scale Vulcan has been flying around the uk shows--starting life with Super tiger 45cc engines---then soon replaced with 2-Zenoah 62cc,then a few years back,converted to twin turbines.I intend retiring this model at the end of the 2010 season,so earlier this year decided to look a...

ANDY--I was over at Falcon last week,and he has a fantastic selection of tubes there---DAVE

Congratulations to Dave S on completion of his test flights yesterday.Harold also saw his Panther take to the air finally yesterday,and complete 3 super flights--the look on his face after the first touch down made it all worth while.A big thanks to the guys up in the Lakes for the use of their faci...

Congrats to big Dave on completing 4 of his test flights today----the model looks superb in flight--some piccies to follow

Keith---i hope you have sent a personal invite to Dave to come and fly with us at Longhorsley?? the new model looks superb---i will be bringing Sir Johns Taube up that weekend as well--DAVE

For anyone in the middle of building a Genesis--Mike has asked me to post the following info-----he has built as per kit ,other than the Elevators and Ailerons.--Last year ,i flew Andy Aitkens around the shows,and although it flew lovely ,and smooth,the control surfaces i thought would be better lar...

I am just completing the radio installation of above,does anyone know the makers recommended balance point??

Nick---oh yes--several more like Mike with the LMA tradestand have built a Genesis and he will also be there---all we need now is some good weather in May !!!!DAVE

Phil--a 62 cc is going in the one you are doing--Mike Eccles is building one[nearly finished] and has fitted a 38cc to his--

ROB---if your club goes ahaed with celebrations ref the Bleriout,i have a 60% bleriout i fly and would be interested in supporting an event there,providing it doesnt clash with prevous arrangements---DAVE

Good afternoon Trevor----firstly,you cant have the best Jag in your garage,because i have had many over the years but for me,the best one is sat in my garage !!! and its a chipped computer management system one. On a more serious note,i too have been looking at changing some of my aircraft onto 2.4,...

Hello Barry---is Dave P keeping ok??he was getting back into flying when i last spoke to him back in the Summer--DAVE