4.5" NARROW wheels

Need technical help on some problem? Let us know and we will see what we can do
Post Reply
Mike Ellis
Posts: 229
Joined: January 15th, 2009, 7:37 pm
Location: Evesham
Contact:
Contact Mike Ellis

4.5" NARROW wheels

Postby Mike Ellis » February 20th, 2012, 8:57 pm

I am looking for some 4.5 to 5" main wheels that are no more than about 1" or so wide. Has anyone got any ideas as to where I can obtain some? I have some Du-Bro at present BUT they are too wide for the spats !! and rub on both sides .
Any Help appreciated.

Mike Ellis LMA 652
Top
Mike altham
Posts: 364
Joined: August 12th, 2010, 11:06 am
Contact:
Contact Mike altham

Re: 4.5" NARROW wheels

Postby Mike altham » February 20th, 2012, 10:51 pm

Robart do some that are thinner than the dubro ones but they are expensive.

I have 4 on the mains of the nimrod and they cost me about £60 each.

Mike
Top
chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:
Contact chris willis

Re: 4.5" NARROW wheels

Postby chris willis » February 22nd, 2012, 8:47 am

push chair wheels are narrow and look ok in spats
Chris
Top
Phil Clark
Posts: 941
Joined: December 4th, 2008, 7:07 pm
Location: Chester-le-Street, Co Durham
Contact:
Contact Phil Clark

Re: 4.5" NARROW wheels

Postby Phil Clark » February 28th, 2012, 11:28 pm

Try Williams Brothers 'Golden Age' wheels...................5" are available, very narrow, can check on width if required as have a set on a current project.

http://www.williamsbrothersmodelproducts.com/rc.html

Phil
Top
Post Reply

Return to “Technical Help required”

Who is online

Users browsing this forum: No registered users and 3 guests