kill switch

Need technical help on some problem? Let us know and we will see what we can do
richard welch
Posts: 8
Joined: November 28th, 2013, 11:22 am
Contact:

kill switch

Postby richard welch » December 26th, 2021, 9:43 am

Hi, I am looking for a zenoah magneto kill switch, i want it to kill the engine is the battery is disconnected, recently my firewall came loose and disconnected the throttle linkage and the kill switch wire going to a servo/micro switch inside the fuselarge, this left the engine on full bore and the kill switch disconnected, anybody have any idears of a kill switch type which will kill the engine when no power is supplied from the battery, most are controlled from the radio and this would not work.

Cary Bailey
Posts: 322
Joined: January 26th, 2011, 7:43 am
Location: Stoke On Trent
Contact:

Re: kill switch

Postby Cary Bailey » December 26th, 2021, 11:38 am

Richard, a quick suggestion would be to replace the magneto ignition with a digital ignition such as a RcXel unit and fit with an electronic kill switch. Unfortunately an expense but will sort your issue.
Cary

John Greenfield
Posts: 424
Joined: December 5th, 2008, 2:08 pm
Contact:

Re: kill switch

Postby John Greenfield » December 27th, 2021, 9:22 am

Fit one of Dave Hayfields failsafe switches. Works with any magneto motor and as an added bonus it will kill the motor if there is a total power loss in the model. He sells direct but you can also find them in his ebay shop.

John


Return to “Technical Help required”

Who is online

Users browsing this forum: No registered users and 4 guests