Large Model Association Forum

Can anybody supply me with the following Aluminium bar, 22mm square x 50mm long if possible with a 16mm hole
bored through the length.Material only will be ok as if necessary i can do the bore myself.
I require two pieces for the job in hand,but if possible make it four then i will have two spares.Many thanks Brian..

Hi Brian
Try Forgale in heckmondwike. I have got all my plate and bar etc for making retracts. Near the Pondarosa not far from Morrisons.
john Evans

John many thanks Forgale have in stock 7/8" square bar which is 22.5mm so i can reduce it on my belt sander.