Jungmeister cowl

Need technical help on some problem? Let us know and we will see what we can do
Post Reply
David Bell
Posts: 27
Joined: January 4th, 2011, 7:34 am
Contact:
Contact David Bell

Jungmeister cowl

Postby David Bell » February 24th, 2011, 11:30 am

Can any one help in the production of a cowl for my 50% jungmeister.
If you can help it would be appreciated and happy to pay for the help.

David bell
Top
Phil Clark
Posts: 941
Joined: December 4th, 2008, 7:07 pm
Location: Chester-le-Street, Co Durham
Contact:
Contact Phil Clark

Re: Jungmeister cowl

Postby Phil Clark » February 25th, 2011, 10:50 am

Give me a buzz David (or we can speak when you collect your wheels at Leeds)

Phil
Top
David Bell
Posts: 27
Joined: January 4th, 2011, 7:34 am
Contact:
Contact David Bell

Re: Jungmeister cowl

Postby David Bell » February 25th, 2011, 1:06 pm

Phil
Will give you some idea of the size of the cowl and will give you a ring later or next week.
The rear of the cowl is 17 inch dia, the front is 15 inch dia and it is 10 inches deep with the seven cylinder head blisters on.
Hope that gives you some idea.

Cheers

Dave
Top
jimlambert
Posts: 30
Joined: December 4th, 2008, 10:59 pm
Contact:
Contact jimlambert

Re: Jungmeister cowl

Postby jimlambert » February 27th, 2011, 10:53 pm

I think Paolo Severin has the moulds for a 1/2 scale Jungmeister cowl heres his website, it would be worth dropping him an e-mail , his 1/3 scale Jungmeister kit is a work of art....
...........Jim Lambert..................... http://www.paoloseverin.it/
Top
Post Reply

Return to “Technical Help required”

Who is online

Users browsing this forum: No registered users and 3 guests