Large Model Association Forum

I'm building a Sky 120 and going to fit the recommended Zenoah 38 engine with a 18 x 10 prop.

Now, LHS (60 mile round trip), has the Xoar but not Menz, which is/was my first choice. What are your thoughts about the different brands?

Richard

My preference is the Menz prop but I use the 19X10 prop on my 84" P51D
Cary

The chairman has been flying the sky 120 with a zenoah 38 for over 3 years now and it has a menz 20/8

Yep my 120 has the same size prop Menz 20x8 and it fly's a treat.

That's about that then. :-) 20 x 10 Menz it shall be. I'll see if LHS can get one in.

Thanks

Richard

Hi,

Why not e-mail Phil Clark at Fighteraces - he'll post one to you.

TTFN,
Neil

Ditto what Neil said..

http://www.fighteraces.co.uk/

£11.25 for a 20 x 8 bargin !!!!

I will admit, most of my stuff comes via the net, but every so (not very) often I get pangs of guilt and use the shop. I think it's the "Use it or Lose it" syndrome and there are bits I do need.

Anyway, with all those things in there that you didn't really know you wanted, who knows what you could come back with!

the largest stock of Menz props find you at http://www.adfamodels.co.uk

RichardVaughanDavies wrote:That's about that then. :-) 20 x 10 Menz it shall be. I'll see if LHS can get one in.

Thanks

Richard

A 20 x 10 is too much for a 38.......that's a prop more commonly fitted to a 45 in a faster flying Warbird type.

20 x 8 is the choice for slower flying & sports models, a 19 x 10 if it's a faster flying or Warbird type.

Phil

Just re-read my last post. Doh! Typo, that should have been 20x8, not 20x10. Thanks Phil.

Still saving for my engine really, March and April are bad months for me re car tax, insurance and MoT on two cars. One of them is a "big boys toy" I'll admit, but it still needs doing. :-)

Richard