Page 1 of 1
painting canopy frames
Posted: January 19th, 2014, 11:31 am
by BRIAN RAWCLIFFE
Has anyone used solarfilm prymol etch primer on clear canopies as a preparation for painting the frame. If so was it successfull, and if anyone knows of a better product feel free to reply.Brian..
Re: painting canopy frames
Posted: January 19th, 2014, 3:10 pm
by Ron Pearman
U-POL acid #8 in spray cans from Halfords works for me.
Re: painting canopy frames
Posted: January 20th, 2014, 8:27 am
by BRIAN RAWCLIFFE
Many thanks Ron,will give it a try.
Re: painting canopy frames
Posted: January 21st, 2014, 11:25 am
by andywynn
Ron Pearman wrote:U-POL acid #8 in spray cans from Halfords works for me.
Same here Brian but it dries grey so need to paint inside first if you can see the inside of frame from the outside.
Cheers
Andy
Re: painting canopy frames
Posted: January 21st, 2014, 8:46 pm
by Phil Clark
If I'm painting a moulded in frame, I apply Prymol 1st followed by a coat of interior green (which shows through the Prymol as it's clear, hence the frame looks green on the inside), then the final exterior colour.
You can just about see the green on the inside of this Corsair canopy.