Large Model Association Forum

Hi all

looking for advice on what servos to purchase

what kg servo would you use on the reed falcon for ailerons, rudder, and elevator?

i am thinking 7-10kg wing servos for elevator and 5 - 10kg for ailerons x 4

see post

viewtopic.php?f=9&t=4925&p=26401&hilit=reed+falcon#p26401


this will be used as a full acrobatic and general flight

i would love some advice please or sugestions, as i have never build a stunt or aerobatic before?

I always over servo as you can never have enough power. For something that size it would be min 15 kg's but that just my thoughts on my 50cc I have 25 kilo ones on Ail and elev (one on each) and then 35 kilo on the rudder.

wow they are big servos, 35k on rudder, crap,

thanks i will look into 15kg and the 35 on rudder

http://www.hobbyking.com/hobbyking/stor ... ouse_.html

this is what i had in mind?

thought please

Hi Richard,
I was able to get a program from Alastair Sutherland, he use to write in model world. It calculates the servo torque, required for any given details. I found the results surprising .I can e mail it to you ,if you think it may help .

that would be grate please email the article to me?
you will find my address on the PM part of the forum