Silencers

Need technical help on some problem? Let us know and we will see what we can do
John Greenfield
Posts: 425
Joined: December 5th, 2008, 2:08 pm
Contact:

Silencers

Postby John Greenfield » September 18th, 2009, 6:46 am

Hello all

Some years ago the late Mike Jackson did an artical on building silencers that was published in the journal. Whilst the basis of the artical was about the construction of the silencer I do recall it had a table in it that gave details of the volume of each chamber in relation to engine capacity. If anyone can recall which journal it was in or has a copy of the artical I would be pleased to have the information.

Thank you in anticipation.

John Greenfield

reg forster
Posts: 1
Joined: December 4th, 2008, 1:54 pm
Contact:

Re: Silencers

Postby reg forster » September 18th, 2009, 10:19 am

The Journal is 66 August 98. Keith Mitchell wrote an article on silencers - ISSUE 16 Feb 2007.
Regards
Reg Forster

Chris Lane
Posts: 134
Joined: December 5th, 2008, 5:04 pm
Location: Lancashire Fylde:
Contact:

Re: Silencers

Postby Chris Lane » September 18th, 2009, 3:24 pm

I will very much appreciate a copy of Mike Jackson's article if it comes to light please (chriscilla.2(AT)btinternet.com)

Chris Lane [2938]

John Greenfield
Posts: 425
Joined: December 5th, 2008, 2:08 pm
Contact:

Re: Silencers

Postby John Greenfield » September 21st, 2009, 6:46 am

Thanks Reg

I will did out my pile of old journals.

John

Alan Cantwell 1131
Posts: 1668
Joined: June 15th, 2009, 8:21 pm
Contact:

Re: Silencers

Postby Alan Cantwell 1131 » September 21st, 2009, 7:32 pm

I too would like to see this article, any chance of a re-run of the late, great mans work??

Barry Bennett
Posts: 37
Joined: December 4th, 2008, 2:15 pm
Contact:

Re: Silencers

Postby Barry Bennett » September 21st, 2009, 9:13 pm

How about a reprint in the next journal, many new members since then won't have the journal.

barrie burton
Posts: 142
Joined: December 4th, 2008, 12:54 pm
Contact:

Re: Silencers

Postby barrie burton » September 25th, 2009, 9:20 pm

John,have just returned from my hols and seen your post.I have the design on a simple software programe.I will email you a copy over the weekend.I know you will say thanks,I have sent out about a dozen copies and only two people have responded.It does not encourage people to help .

Alan Cantwell 1131
Posts: 1668
Joined: June 15th, 2009, 8:21 pm
Contact:

Re: Silencers

Postby Alan Cantwell 1131 » September 26th, 2009, 6:49 pm

well, i would like to say thanks in advance, could i have a copy please? :D

alan.cantwell@ntlworld.com

barrie burton
Posts: 142
Joined: December 4th, 2008, 12:54 pm
Contact:

Re: Silencers

Postby barrie burton » September 26th, 2009, 7:57 pm

Alan,it has been sent.

Alan Cantwell 1131
Posts: 1668
Joined: June 15th, 2009, 8:21 pm
Contact:

Re: Silencers

Postby Alan Cantwell 1131 » September 27th, 2009, 9:35 am

and recieved, and being played with, very informative, thanks loads, and yes, i am going to Gaydon,

John Greenfield
Posts: 425
Joined: December 5th, 2008, 2:08 pm
Contact:

Re: Silencers

Postby John Greenfield » September 28th, 2009, 6:49 am

Barrie

Thanks for thking the time and effort to help, much appreciated. Now I have got something to work with for the Tiger Moth silencing system.

Best regards

John

Mike Booth
Posts: 648
Joined: December 4th, 2008, 5:51 pm
Contact:

Re: Silencers

Postby Mike Booth » October 15th, 2009, 6:57 pm

He also developed a single cylinder air piston for scale retracts.
Its simplicity was shear brilliance.

Brian J Dix
Posts: 9
Joined: December 4th, 2008, 4:45 pm
Location: Gloucester
Contact:

Re: Silencers

Postby Brian J Dix » October 29th, 2009, 9:08 pm

Barry,
Would you kindly let me have a copy of your silencer/muffler information.our local club has started to enforce tighter noise controls so have to construct suitable exhaust for a range of engines. I would like to thank you in advance for your trouble, my address is. capt.wot@googlemail.com
regards. Brian.

Mike Booth
Posts: 648
Joined: December 4th, 2008, 5:51 pm
Contact:

Re: Silencers

Postby Mike Booth » October 29th, 2009, 11:21 pm

Barry, yes I too would be grateful for the lesson on volume and silencing.

Regards Mike. studio.mike@btinternet.com

barrie burton
Posts: 142
Joined: December 4th, 2008, 12:54 pm
Contact:

Re: Silencers

Postby barrie burton » October 30th, 2009, 9:10 am

Brian & Mike,I will send the emails with the info later to-day.

Steve Morris
Posts: 39
Joined: December 5th, 2008, 4:36 pm
Contact:

Re: Silencers

Postby Steve Morris » October 30th, 2009, 10:45 am

Barrie, any chance I can get a copy as well, morrissp@btclick.com

Thanks
Steve

Simon Willey
Posts: 119
Joined: December 9th, 2008, 7:15 am
Location: Penryn Cornwall
Contact:

Re: Silencers

Postby Simon Willey » October 30th, 2009, 11:59 am

I would be glad of a copy as well please.
Thanks very much

Simon
The Dawn Patrol
LMA No 3109

Brian J Dix
Posts: 9
Joined: December 4th, 2008, 4:45 pm
Location: Gloucester
Contact:

Re: Silencers

Postby Brian J Dix » October 30th, 2009, 3:23 pm

Thank you very much Barry, apreciated the very quick responce to my request .May be able to return the complement one day. Should now be able to make some progress, so thanks again Barry.
Best regards.Brian

Simon Willey
Posts: 119
Joined: December 9th, 2008, 7:15 am
Location: Penryn Cornwall
Contact:

Re: Silencers

Postby Simon Willey » October 30th, 2009, 5:51 pm

I forgot to give you my email address koicity@tiscali.co.uk

Regards Simon
The Dawn Patrol
LMA No 3109

Alex Calderhead
Posts: 8
Joined: April 30th, 2009, 11:49 am
Contact:

Re: Silencers

Postby Alex Calderhead » November 1st, 2009, 4:33 pm

Hi Barry,

As a new member of the LMA this silencer information would be of great help, if you could find the time to email me a copy of the software too I would be most grateful


Regards,

Alex.

Email to: alex@highlandimages.plus.com
LMA Number 3212


Return to “Technical Help required”

Who is online

Users browsing this forum: No registered users and 3 guests