Large Model Association Forum

Posted: **March 3rd, 2018, 12:44 pm**

i am looking for advice on the best method for a 2 into 1 exhaust and any recommendations for a possible custom made

on my p47 cowl i have limited space i would like to fit a pitts barrel single outlet into the cowl as the standard 120 cans will have to cut the cowl which i don't want to do!

Posted: **March 3rd, 2018, 3:57 pm**

look on eBay under motorbikes

Posted: **March 3rd, 2018, 5:24 pm**

How big is the plane Richard? there is loads of space in a p47 cowl. this is my 102" with a 3w 160cc up front.

: DSCF0860.JPG (43.98 KiB) Viewed 4815 times

: DSCF0861.JPG (44.65 KiB) Viewed 4815 times

: DSCF0869.JPG (47.12 KiB) Viewed 4815 times

side panels cover the heads.

Posted: **March 3rd, 2018, 7:30 pm**

i might be wrong just taken a second look a 120cc twin is 255mm without plugs might be a tight fit

it originally had an 3w 80cc (underpowered)i am upping it to 120cc but was not sure that it would fit with the exhaust in place?

: 2crop.jpg (206.16 KiB) Viewed 4801 times

: 1crop.jpg (143.86 KiB) Viewed 4801 times

: 4crop.jpg (150.06 KiB) Viewed 4801 times

: 3crop.jpg (174.07 KiB) Viewed 4801 times

Posted: **March 3rd, 2018, 9:23 pm**

: fuz.jpg (166.5 KiB) Viewed 4787 times

Large Model Association Forum

120cc exhaust

120cc exhaust

Re: 120cc exhaust

Re: 120cc exhaust

Re: 120cc exhaust

Re: 120cc exhaust