Large Model Association Forum

Just finalising the tank position in a new model, NGH38cc FS with Walbro carb. Best place for tank is with tank center line about 40mm above the carb center line. I understand that tank position isn't critical with a Walbro carb, so having the tank higher than the carb shouldn't be a problem, is that correct?

Thanks

That is correct Frank . . the carb itself will regulate the fuel flow through the regulator valve. Having the tank a little higher will help with fuel draw from a cold start . . . cheers

Thanks, that's what I thought but wanted to confirm before I build the tank support.