Flair Tiger Moth C of G

Need technical help on some problem? Let us know and we will see what we can do
Post Reply
Dave Tregaskes
Posts: 20
Joined: December 4th, 2008, 3:07 pm
Location: Cornwall
Contact:
Contact Dave Tregaskes

Flair Tiger Moth C of G

Postby Dave Tregaskes » December 7th, 2009, 7:17 pm

I have just aquired a completed 1/4 Flair Tiger Moth but without original drawings or instructions.
Can anyone let me know where the C of G should be for this model.
I have a reasonable and safe position from calculation, but would like to know what Flair originally specified.

Dave Tregaskes 2474
Top
Dave Hoare
Posts: 4
Joined: December 9th, 2008, 7:03 pm
Contact:
Contact Dave Hoare

Re: Flair Tiger Moth C of G

Postby Dave Hoare » December 8th, 2009, 5:16 pm

Hi Dave,
Just checked the instructions from an unbuilt Flair kit that I have and it gives the CG as 190-210mm back from the leading edge at the centre section. It goes on to say it should balance in a 3deg nose down attitude.
RGds,
Dave
Top
Dave Tregaskes
Posts: 20
Joined: December 4th, 2008, 3:07 pm
Location: Cornwall
Contact:
Contact Dave Tregaskes

Re: Flair Tiger Moth C of G

Postby Dave Tregaskes » December 8th, 2009, 7:09 pm

Hi Dave,

Greatly appreciated, many thanks to you. Now I can check the setup!

Dave Tregaskes
Top
Post Reply

Return to “Technical Help required”

Who is online

Users browsing this forum: No registered users and 3 guests