Toni Clark 30% Sopwith Pup engine fitment

Need technical help on some problem? Let us know and we will see what we can do
Mick Black
Posts: 28
Joined: November 24th, 2017, 4:21 pm
Contact:

Toni Clark 30% Sopwith Pup engine fitment

Postby Mick Black » January 29th, 2021, 4:13 pm

Hi all has anyone built the Toni Clarke Sopwith Pup with the Zenoah with reduction gear. I have a picture from Toni Clark but when I fit it in the same position mine is 15mm to high. To lower it I would have to cut the cowl. Just wondered if anyone had solved this problem.

Mick Black
Posts: 28
Joined: November 24th, 2017, 4:21 pm
Contact:

Re: Toni Clark 30% Sopwith Pup engine fitment

Postby Mick Black » January 29th, 2021, 4:17 pm

BAFAD219-79A1-47D0-A225-49A60CED260E.jpeg
BAFAD219-79A1-47D0-A225-49A60CED260E.jpeg (244.03 KiB) Viewed 3010 times

User avatar
Peter Smedley
Posts: 148
Joined: October 24th, 2017, 9:22 pm
Location: Deepest Cornwall
Contact:

Re: Toni Clark 30% Sopwith Pup engine fitment

Postby Peter Smedley » February 6th, 2021, 7:25 am

https://toni-clark.com/bilder/galerie/b ... index.html

Looks like the ignition module sit around 5 o’clock...and the cowl is cut for it
Fly ‘til I die...


Return to “Technical Help required”

Who is online

Users browsing this forum: No registered users and 4 guests