Information wanted

Post here for general queries or anything radio related.
User avatar
John Evans
Posts: 150
Joined: December 4th, 2008, 7:02 pm
Contact:

Information wanted

Postby John Evans » June 28th, 2017, 5:42 pm

I am trying to set up a twin petrol model using twin recievers. I have got both throttles to work independently on the throttle stick and now the problem
Channel 3 and 8 are being used.
When I try to set the failsafe on 3 no problem failsafe will not set on auxillary 8.
The same problem occurs when trying to set the throttle cut yet again only 3 will cut on switch designated
Radio is a zap 9 old i know but should still do the job

David Bell
Posts: 27
Joined: January 4th, 2011, 7:34 am
Contact:

Re: Information wanted

Postby David Bell » February 19th, 2019, 7:05 pm

John.
Why dont you have both throttle servks on channel 3. Should both work then

User avatar
Peter Smedley
Posts: 148
Joined: October 24th, 2017, 9:22 pm
Location: Deepest Cornwall
Contact:

Re: Information wanted

Postby Peter Smedley » March 17th, 2019, 7:29 am

I assume your 9z is on futaba FASST? You could try a FASST FrSky Rx . The faile safe is on all channels.
Fly ‘til I die...


Return to “Radio Equipment”

Who is online

Users browsing this forum: No registered users and 5 guests