Page 1 of 1
Jet pipe material
Posted: October 28th, 2017, 12:41 pm
by Max Francey
I want to build myself a bifurcated jet pipe for a Eurofighter I'm building. I know these are difficult to get right so I'm expecting to need to build a few before I get the design right. Does anyone know of an affordable source of 0.2mm (0.008") stainless sheet/foil, preferably in the UK?
Re: Jet pipe material
Posted: October 28th, 2017, 8:33 pm
by Tony Collins 1073
Re: Jet pipe material
Posted: October 29th, 2017, 9:01 am
by Max Francey
Thanks Tony
Their website appears to be undergoing maintenance this weekend, will try Monday
Max
Re: Jet pipe material
Posted: October 29th, 2017, 11:22 am
by Steve Perry
Although from china, ebay item 272750563724
Re: Jet pipe material
Posted: October 29th, 2017, 2:53 pm
by Max Francey
Thanks Steve, that looks promising, and price not too bad. Will investigate further.
Max
Re: Jet pipe material
Posted: November 23rd, 2017, 12:21 pm
by Mike altham
mick reeves models sell it
Re: Jet pipe material
Posted: November 23rd, 2017, 12:26 pm
by Mike altham
http://www.grumania.com/xtcommerce/medi ... 980385.pdfYou ideally need 316 stainless sheet. I made my own dual wall ones for the nimrod
Re: Jet pipe material
Posted: November 23rd, 2017, 12:27 pm
by Mike altham
Re: Jet pipe material
Posted: November 9th, 2018, 3:36 pm
by Clive A Babington
I get mine from :-
Phone: +44 (0)1952 299333
Email:
sales@hollinbrow.co.uk Telford Shropshire
Not cheap but proper stainless shim. They will sell a meter long, I think it comes in one foot width X about 2 thou upwards for about £70