8.75m span uas parts
Posted: December 5th, 2021, 11:31 pm
As in title
I started a project a while ago but just not finished it and now the drive has gone.
8.75m aimed to be about 10 to 12kg rtf minus lipos
Has all wing cores with glass fibre spars, all wiring in mainly powerbox, all carbon booms etc.
Comes with all servos needed and 2 x escs and all 3d printed parts. Can supply files as well.
This has cost over £600 mainly carbon cost.
Will need the wings and stab glassing etc.
This is a unfinished project that needs completing.
Looking for £300
I started a project a while ago but just not finished it and now the drive has gone.
8.75m aimed to be about 10 to 12kg rtf minus lipos
Has all wing cores with glass fibre spars, all wiring in mainly powerbox, all carbon booms etc.
Comes with all servos needed and 2 x escs and all 3d printed parts. Can supply files as well.
This has cost over £600 mainly carbon cost.
Will need the wings and stab glassing etc.
This is a unfinished project that needs completing.
Looking for £300