Page 1 of 1

Peter Barth 1/3 scale waco

Posted: October 17th, 2022, 7:03 pm
by Matthow1
I have for sale an almost 90% built 1/3 scale Waco biplane

Built from a Peter Barth kit of Germany

This awesome model has been very well built up to this point.
And will need finishing to a similar std .

Fuselage

Pretty much done except paint and tte final of all the flutes and trims . Fuselage is covered to a very good std in oratex .
Amazing cockpit detail has been added and all servos have been fitted in the tail for the elevators . Undercarriage has been built and fitted .

Has a brand new dle 130 fitted inside the huge cowl which is fitted and rear trim is still loose waiting for paint .

The wings are all built and to a very good std but still require a final sand and balsa loc . All four aileron servos have been fitted and are awaiting ailerons which need to be hinged . The wings come in four sections for easy transport once compete .

I have all parts to complete the model from the kit inc plans , parts list which is all numerical and matches up to the correct bag of screws and parts which are all in numbered bags as per the kit . All the composite components inc ailerons , fuz trims , spats , Uc flares etc etc

Will require wheels as I don’t have these nor do they come in the kit , something around 7 inch will be fine

All servos fitted are macgreggor HV high torque metal geared throughout.

Brand new and unrun dle 130 twin .

I will also inc 10m roll of oratex to complete the covering .

This will be an absolute show stopper and once complete will be model worth in excess or 5k

New owner will not be disappointed with this build its very good to this point just needs the final bits doing .

Asking £2250
Or without engine £1250

Thanks for reading . I will try answer any questions and any inspection is welcome before purchase . I can also get more pics if needed

Based in Northampton