Grumman F11F Tiger
Posted: July 15th, 2025, 7:56 am
This model came from the estate of the late Dave Nieman, a very unusual subject of a US Navy jet, a fair bit of work is required to complete. It is for a 180/200 turbine size, quite a big model, made easier to transport by the split fuselage design.
Front fuselage section x2 + intake moulds x2
Rear fuselage section x2 + exhaust mould x1
Wing set
Tailplane set
Moulded canopy frame and canopy
Main retract units and nosewheel retract unit
A lot of full size drawings, too many to detail + book
The air retract system is bespoke and a real work of art, they are mounted in a test frame at present. The mouldings are epoxy glass and are very nicely made and there are two sets of fuselage moulds.
Fuselage length is 2.66 metres, wingspan is 1.77 metres.
£350
COLLECTION ONLY FROM NORTH SOMERSET J21/M5 OR CHELTENHAM OR CARTERTON (OXFORD) AREA
Please PM or email jamiecuff@hotmail.co.uk if interested.
Front fuselage section x2 + intake moulds x2
Rear fuselage section x2 + exhaust mould x1
Wing set
Tailplane set
Moulded canopy frame and canopy
Main retract units and nosewheel retract unit
A lot of full size drawings, too many to detail + book
The air retract system is bespoke and a real work of art, they are mounted in a test frame at present. The mouldings are epoxy glass and are very nicely made and there are two sets of fuselage moulds.
Fuselage length is 2.66 metres, wingspan is 1.77 metres.
£350
COLLECTION ONLY FROM NORTH SOMERSET J21/M5 OR CHELTENHAM OR CARTERTON (OXFORD) AREA
Please PM or email jamiecuff@hotmail.co.uk if interested.
- 518325441_10162407205371843_9168710056155302759_n.jpg (115.73 KiB) Viewed 16853 times