Large Model Association Forum

Due to a timewasting tyre kicker I am now re advertising my SKYMASTER F-18.

The model is 90 inch long and 67 inch wing span, it is set up for a Jets Munt 160 turbine (not included in the sale). There is a mixture of servos in the model (MKS, Savox and Hitec) and it has a Emcotec DPSI Power Switch system fitted. The model is based upon VFA-102 Diamond Backs and is painted and is painted the same as the full size aircraft that the model represents, the model is fully weathered and highly detailed, the model has the full set of Taylormade decals applied to the aircraft and all of the ordinance.

The model has ROBART undercarriage fitted, (not the Skymaster U/C), this ensures the U/C is reliable even with the lowest pressures in the tanks. The model comes with a full ordinance package that cost £ 450-00 alone. The model has twin after burner lights fitted

The only issues I know about are one of the nose leg gear doors needs to be re fixed to the hinge, one main gear door needs a replacement hinge and the canopy has a slight yellowing in the plastic. (photos available)

The model has not been damaged or repaired, this can be verified upon visual inspection. There is no turbine, lipos or receiver in the sale.

Please email me for more photos as I now have loads of photos of the fully assembled model.

Cost for model and ordinance package is £ 1200.00

Model is located in Leeds, contact me on andyshutt01@gmail.com or text me on 0770 319 3751

Note, this model is fully weathered and detailed, IT IS NOT A GLOSSY SHOW ROOM MODEL, it is an accurate replica of full size aeroplane

Deposit now paid so sold pending final payment.

Thank you for the overwhelming interest on this model, I did not think it would be that appealing but I was wrong, could have sold it 5 times already.

Andy