Hanger 9 Viking BNIB
Posted: July 21st, 2018, 5:47 pm
BNIB Hanger 9 Model 12 Viking BNIB
This is most likely the last one available anywhere that is BNIB, miss it now and forever regret it.....
Airfoil Shape: Symmetrical
Approximate Assembly Time: 20+ Hours
CG (Center of Gravity): 63mm behind leading edge of lower wing. Range 60-70mm.
Completion Level: Almost Ready-to-Fly
Engine Size: 100cc - 125cc
Flaps: No
Flying Weight: 26-28 lb (12-13 kg)
Landing Gear: Yes
Length: 87.0 in (2.21 m)
Material: Balsa
Retracts: No
Size/Scale: Giant
Spinner Size: 6 inch
Trimscheme Colors: Deep Blue, Cub Yellow, Silver
Wing Area: 2490 sq in (161 sq dm)
Wing Tube Length: 33.75 in (858 mm) (upper and lower). Anti-rotation pin: 335mm.
Wing Tube OD: 1.0 in (25.4 mm) (upper and lower). Anti-rotation pin: 8mm.
Wingspan: 89.2 in (2.26 m)
Giant-scale replica of an airshow stunner
Lightweight, balsa/plywood construction
Painted 2-piece fiberglass cowl
Painted aluminum landing gear and fiberglass wheel pants
Vibrant UltraCote trim scheme
2-piece plug-in wings
Large fuselage hatch with matching finish and clear canopy
Pre-hinged control surfaces
Lightweight, carbon-fiber wing tubes
Scale flying wires for the tail
Accepts a variety of exhaust options (mufflers, canisters and pipes)
Tail wheel assembly with carbon fiber bracket
Includes all necessary hardware
This is a collection only model and will also be cash on collection / inspection only.
£1500.00 cash on collection.
Call me for details on 07960 410340, Martin.
- HAN1065_b0.jpg (318.56 KiB) Viewed 2151 times
This is most likely the last one available anywhere that is BNIB, miss it now and forever regret it.....
Airfoil Shape: Symmetrical
Approximate Assembly Time: 20+ Hours
CG (Center of Gravity): 63mm behind leading edge of lower wing. Range 60-70mm.
Completion Level: Almost Ready-to-Fly
Engine Size: 100cc - 125cc
Flaps: No
Flying Weight: 26-28 lb (12-13 kg)
Landing Gear: Yes
Length: 87.0 in (2.21 m)
Material: Balsa
Retracts: No
Size/Scale: Giant
Spinner Size: 6 inch
Trimscheme Colors: Deep Blue, Cub Yellow, Silver
Wing Area: 2490 sq in (161 sq dm)
Wing Tube Length: 33.75 in (858 mm) (upper and lower). Anti-rotation pin: 335mm.
Wing Tube OD: 1.0 in (25.4 mm) (upper and lower). Anti-rotation pin: 8mm.
Wingspan: 89.2 in (2.26 m)
Giant-scale replica of an airshow stunner
Lightweight, balsa/plywood construction
Painted 2-piece fiberglass cowl
Painted aluminum landing gear and fiberglass wheel pants
Vibrant UltraCote trim scheme
2-piece plug-in wings
Large fuselage hatch with matching finish and clear canopy
Pre-hinged control surfaces
Lightweight, carbon-fiber wing tubes
Scale flying wires for the tail
Accepts a variety of exhaust options (mufflers, canisters and pipes)
Tail wheel assembly with carbon fiber bracket
Includes all necessary hardware
This is a collection only model and will also be cash on collection / inspection only.
£1500.00 cash on collection.
Call me for details on 07960 410340, Martin.