SOLD 74" 1/6th Scale P51 Mustang ARTF

Post your sales or wanted list here
Ron Wylie
Posts: 111
Joined: October 17th, 2014, 1:54 am
Location: Grimsby, Lincolnshire
Contact:

SOLD 74" 1/6th Scale P51 Mustang ARTF

Postby Ron Wylie » August 7th, 2020, 7:23 am

SOLD - Lovely Mustang P51, 74" (Possibly Pica Enterprise kit ?) with ASP 108 2 Stroke engine which feels really smooth with lots of compression. Concealed muffler. Air retracts which have not been used and are "blanked off" ( for some reason) . Retract tail wheel. All servos and 35Mhz RX. Will need new flight battery. In nice condition with a few hangar "dings" but no structural damage. Very nice model. £300 OVNO. Can meet at reasonable distance from Grimsby but must observe Social Distance.
Attachments
Large P51 6.JPG
Large P51 6.JPG (540.92 KiB) Viewed 3665 times
Large P51 8.JPG
Large P51 8.JPG (576.58 KiB) Viewed 3665 times
Large P51 5.JPG
Large P51 5.JPG (556.87 KiB) Viewed 3665 times
Large P51 7.JPG
Large P51 7.JPG (334.25 KiB) Viewed 3665 times
Large P51 4.JPG
Large P51 4.JPG (499.76 KiB) Viewed 3665 times
Large P51 3.JPG
Large P51 3.JPG (301.64 KiB) Viewed 3665 times
Last edited by Ron Wylie on August 15th, 2020, 4:04 pm, edited 1 time in total.

ian redshaw
Posts: 217
Joined: December 4th, 2008, 7:13 pm
Contact:

Re: 74" 1/6th Scale P51 Mustang ARTF

Postby ian redshaw » August 7th, 2020, 4:40 pm

Hi Ron, when you say blanked off, do you mean the wheel wells have been covered over like in your photo of the underside? I hope not as these look like the scale doors present on a Mustang, have you tried opening them?!!

Ian.

Ron Wylie
Posts: 111
Joined: October 17th, 2014, 1:54 am
Location: Grimsby, Lincolnshire
Contact:

Re: 74" 1/6th Scale P51 Mustang ARTF

Postby Ron Wylie » August 7th, 2020, 6:04 pm

Hi Thanks for your information. I have knowledge of air retracts and not the equipment to try them, so I have desctibed them in the best way I can and let any potential buyer decide. Thanks again

Ron Wylie
Posts: 111
Joined: October 17th, 2014, 1:54 am
Location: Grimsby, Lincolnshire
Contact:

Re: 74" 1/6th Scale P51 Mustang ARTF

Postby Ron Wylie » August 7th, 2020, 6:05 pm

sorry that should be no knowledge and I could do more damage, Best to let those that know deal with it!

Ron Wylie
Posts: 111
Joined: October 17th, 2014, 1:54 am
Location: Grimsby, Lincolnshire
Contact:

Re: 74" 1/6th Scale P51 Mustang ARTF

Postby Ron Wylie » August 8th, 2020, 5:34 am

On further examination, Ian is correct (thank you Ian). These are not blanking plates they are part of the retract system. There are 2 servos which lower them (used a servo tester) thus allowing the wheels to retract into the wing. Very clever. So I retract (no pun intended) the statement that they are "blanked off". Now worth more money?
Attachments
Large P51 uc 2.JPG
Large P51 uc 2.JPG (620.68 KiB) Viewed 3461 times
Large P51 uc 4.JPG
Large P51 uc 4.JPG (532.09 KiB) Viewed 3461 times
Last edited by Ron Wylie on August 9th, 2020, 12:55 pm, edited 1 time in total.

Cary Bailey
Posts: 323
Joined: January 26th, 2011, 7:43 am
Location: Stoke On Trent
Contact:

Re: 74" 1/6th Scale P51 Mustang ARTF

Postby Cary Bailey » August 9th, 2020, 8:51 am

Hi Ron, with all the gear working the model is worth £300 all day long!
Cary


Return to “For Sale or Wanted”

Who is online

Users browsing this forum: No registered users and 8 guests