WWI SE5 1/3 scale 108” span
Posted: July 20th, 2021, 5:21 pm
SE5 for sale
WWI SE5 1/3 scale 108” span
Built from the Vailly Aviation plan set using a Belair cut kit
This is complete but is unflown, it is registered with the LMA and has been inspected and signed off. The construction is standard built up with Solartex covering. Wings attached on carbon tubes.
Model includes the following which is all new.
Zenoah 62 fitted with easy start socket, with Mick Reeves reduction drive and 30 x 10 Menz prop
2 x Spektrum AR8000 receivers
5 x Hitec 645MG servos on flying surfaces and JR 591’s on throttle and choke
2 heavy duty switches and 2 3800 5 cell Nimh’s
Dubro 1/3 scale vintage wheels
3 d printed Pilot.
Plan set which has been used but is still good.
£1600, please contact me for further details or pics, model location in Gloucester.
More info on this model can be found at http://www.Belairkits.com
- EF408A54-1191-4AD2-9A46-90C282B6DF25.jpeg (54.49 KiB) Viewed 3608 times
WWI SE5 1/3 scale 108” span
Built from the Vailly Aviation plan set using a Belair cut kit
This is complete but is unflown, it is registered with the LMA and has been inspected and signed off. The construction is standard built up with Solartex covering. Wings attached on carbon tubes.
Model includes the following which is all new.
Zenoah 62 fitted with easy start socket, with Mick Reeves reduction drive and 30 x 10 Menz prop
2 x Spektrum AR8000 receivers
5 x Hitec 645MG servos on flying surfaces and JR 591’s on throttle and choke
2 heavy duty switches and 2 3800 5 cell Nimh’s
Dubro 1/3 scale vintage wheels
3 d printed Pilot.
Plan set which has been used but is still good.
£1600, please contact me for further details or pics, model location in Gloucester.
More info on this model can be found at http://www.Belairkits.com