Page 1 of 1

HELP!!!!!!!!!!

Posted: August 1st, 2010, 5:33 pm
by robbieskipton
Got a small problem..

The 60% Yak 54 is 1 month away from completing.......BUT... i have a problem..

My Club will not let me fly it down there as it is apparently TOO BIG.... So, i was wondering... Is there anyone out there, who beleives that there club would let me do my proving flights there ( Within the west midlands...)

Ideal Field..

No Trees ( Ideally)
Long Runway ( As i dont know what it is going to be like on landing)
Ideally Flat Land
No Noise Issues as it is loud

Is there such a magical place?

Regards

Robbie

Re: HELP!!!!!!!!!!

Posted: August 1st, 2010, 6:57 pm
by geoff dales
we d make you welcome at Winterton although it might be a bit far to come

Re: HELP!!!!!!!!!!

Posted: August 1st, 2010, 7:20 pm
by robbieskipton
Thank yiu very much for the offer.. But 140 miles is too far, as the plane has to be transported in 2 Landrovers !!!!

Re: HELP!!!!!!!!!!

Posted: August 1st, 2010, 8:13 pm
by Tony Collins 1073
Rob, Two Land Rovers For one model does not seem very practical to me. You need a trailer surely.

Why not put the required dimensions on here and see what may come up. It could be the answer.

Re: HELP!!!!!!!!!!

Posted: August 1st, 2010, 10:13 pm
by Steve Mitchell
I'm sure we could help you out, but again were 150ish mile from you in Norfolk (West Raynham airfield)

Good local B+B's though to make a w/end of it :D

Re: HELP!!!!!!!!!!

Posted: August 2nd, 2010, 3:05 pm
by robbieskipton
Hmm, Thanks again for the offer,, But 150 Again is tooooooo Far.... If only you were 100 miles closer :(

Re: HELP!!!!!!!!!!

Posted: August 2nd, 2010, 5:01 pm
by Steve Mitchell
robbieskipton wrote:Hmm, Thanks again for the offer,, But 150 Again is tooooooo Far.... If only you were 100 miles closer :(


Bet your glad you designed and built a 60% er!!

Re: HELP!!!!!!!!!!

Posted: August 2nd, 2010, 9:24 pm
by robbieskipton
Well, To be honest i am happy that i built it and designed it Until Cosford.. When some of the club members ( The Comittee) saw it, and went in to panic stations and started fluttering around like chickens,

We didnt have a problem with flying it at my club, we even asked before we built it, " is/was it ok to build and fly it down here" and the answer was something around " You are mad, But yes you can".
We asked the comitte every month if it was still ok, and the answer was always "Yes", But soon as they saw it, it was " You cant fly that down there"

Hence the reason we now have a problem... :(

Re: HELP!!!!!!!!!!

Posted: August 3rd, 2010, 10:45 am
by stewart clifford
Don't you just love club commitees, I'd be patient, one good hard cold winter and you might have a new younger commitee next year. :lol: .

Stewart

Re: HELP!!!!!!!!!!

Posted: August 3rd, 2010, 2:32 pm
by robbieskipton
Ouch,... There is two ways to take that, One is harsh, One is ok...

I wish they would change, but ti has been the same comittee memebers for 5 years at least now :(

Re: HELP!!!!!!!!!!

Posted: August 3rd, 2010, 6:55 pm
by RayHuxley

Re: HELP!!!!!!!!!!

Posted: August 4th, 2010, 7:10 am
by Dave Berry 2911
Im not a member so cant speak for them, but have you approached the chaps at Langar near Nottingham, its a nice site and they are a good bunch. Not sure what part of West Mids you live in, but it fairly easy to get to, you just need your passport to cross the A5 :)

As for your club, thats a real shame. Ive looked at one clubs website (a very well know club in the West Midlands) and they suggest that a .40 is a large engine and pilots should wear flo vests when flying..... :roll: ...as long as its a safe plane on a suitable site and the obvious common sense rules are observed (no fly zones, frequencies etc) then thats it

Anyway I look forward to seeing the beast fly


Chris Berry 2912