AND SHE IS READY!!!

Any topic that is not suitable for the other topic items
robbieskipton
Posts: 136
Joined: December 16th, 2008, 10:36 pm
Location: Kingswinford
Contact:

AND SHE IS READY!!!

Postby robbieskipton » October 10th, 2010, 1:02 pm

Well Folks,

Here is the last pics you will see of the 60% Yak 54....Before she flies..

It has taken us 14 Months Exactly to complete, But we can now say it is ready for her maiden...

Just waiting for the LMA to inspection at the Gaydon Event in a few weeks.( Or if the inspectors could pull there finger out..Coff Coff Dave Johnson Coff Coff Tony Hooper :lol: could be earlier )

So if it passes the inspection etc. It should be ready to fly mid to end of November

Final vital statistics.

Weight 115 lbs Auw
18 x Spectrum 6030 Servos
Power Box Royal
Etc
Attachments
Yak1.jpg
Pic 1
Yak1.jpg (52.21 KiB) Viewed 7152 times
yAK2.jpg
Pic 2
yAK2.jpg (59.65 KiB) Viewed 7152 times
yAK3.jpg
Pic 3
yAK3.jpg (46.73 KiB) Viewed 7152 times
yAK4.jpg
Pic 4
yAK4.jpg (55.15 KiB) Viewed 7152 times
" If it aint an Inch off the deck, you aint flying 3D"

www.bmdsigns-wraps.co.uk
" For all your signage requirements"

www.Skipmodeldesigns.co.uk
" Laser cutting, Cnc Routing Service"
Stockists of JR Servos, Pilot RC Aircraft, and Skip Model Designs aircraft + Much More"

Barry Bennett
Posts: 37
Joined: December 4th, 2008, 2:15 pm
Contact:

Re: AND SHE IS READY!!!

Postby Barry Bennett » October 10th, 2010, 2:59 pm

Hope you got permission to put one wheel on neighbours drive. :o
Luv to see it fly, keep us informed

User avatar
Dave Parry
Site Admin
Posts: 1078
Joined: November 27th, 2008, 10:39 pm
Location: St.Helens, Mersyside.
Contact:

Re: AND SHE IS READY!!!

Postby Dave Parry » October 10th, 2010, 9:20 pm

Congratulations Robbie, I wish you all the best with her maiden flight its going to be a show stopper. :geek:

John Townsend 389
Posts: 24
Joined: December 4th, 2008, 2:10 pm
Contact:

Re: AND SHE IS READY!!!

Postby John Townsend 389 » October 11th, 2010, 12:36 pm

Robbie,
Good luck with the test flying, look forward to seeing it fly next season.

John

Mike altham
Posts: 351
Joined: August 12th, 2010, 11:06 am
Contact:

Re: AND SHE IS READY!!!

Postby Mike altham » October 12th, 2010, 2:15 pm

Looking good mate.

Cant wait to see it fly.

Just wondering, but with my 6 Yaks and what I was told by Quique Somenzini is that the prop has to protrude out of the cowl quite alot as if it is close you lose alot of power.

The full size is the same with it poking out.

Just a thought.

Mike.

robbieskipton
Posts: 136
Joined: December 16th, 2008, 10:36 pm
Location: Kingswinford
Contact:

Re: AND SHE IS READY!!!

Postby robbieskipton » October 12th, 2010, 7:08 pm

Hi Mike,
Yes you are correct, Normally the prop does come out of the cowl, however, as mine is scale by airframe, the engine will not be big enough to handel the 46 inch prop required to do this...

We are only running a 39 Atm for running in, but will soon need to go up to a 40.... every inch counts :) and then the 39 inch becomes a very expensive tent peg :lol:,
Its just the matter of sucking it and seeing
" If it aint an Inch off the deck, you aint flying 3D"

www.bmdsigns-wraps.co.uk
" For all your signage requirements"

www.Skipmodeldesigns.co.uk
" Laser cutting, Cnc Routing Service"
Stockists of JR Servos, Pilot RC Aircraft, and Skip Model Designs aircraft + Much More"


Return to “General Discussion Topics”

Who is online

Users browsing this forum: No registered users and 5 guests