Mossie Retracts

[Jack Kennedy]

I have a 72" Mossie, I think it's a CMP D240 model, it had two 42 glow engines in it, will be converting to leccy, this should not be a problem, I hope.

1395509221992.jpg (18.54 KiB) Viewed 9323 times

1395509158573.jpg (17.8 KiB) Viewed 9323 times

The retracts that were in it are in my opinion no longer fit for purpose,(a nice set of air retracts would be the dogs) my problem at the moment is I am finding it a bit of a pain to find retracts suitable for this size and make of model, if my engineering skills were about 10 levels higher than they are now I supose I could knit a new pair.
( more metal would be wasted than put together).

1395512133246.jpg (13.6 KiB) Viewed 9323 times

1395512161790.jpg (13.37 KiB) Viewed 9323 times

1395512185520.jpg (15.01 KiB) Viewed 9323 times

any help or advice ( other than bin it) would be a big help.

Jack

[sean smith]

You could try Unitracts they used to make a set for around this size model.

[Jack Kennedy]

Hi! Sean
have looked in Unitracts and the only one I can see for an 81" Brian Taylor full system £330.00

thanks

Jack

[sean smith]

Hi Jack,
I would contact them and see if they could make you a slightly smaller set? They made a set for my 124" Mosquito by scaling the smaller units up.

Sean.

[Jack Kennedy]

Thanks Sean, will give them a call and sort something out, hopefully.

Jack

[ROBERT LOWE]

Unitracts You get good sound advices from them they have sorted me out several times.

Bob Lowe.

[Ron Pearman]

I had a set of Unitracts made for a Brian Taylor 71" Mosi that I built and converted to electric. They are extremely heavy and with the weight of a 4s 5000ma battery plus two speed controllers and two G46 motors I have never dared fly it due to the wing loading. I've never weighed it, it just feels wrong even though it required no ballast at all for the CofG.

[Jack Kennedy]

Hi Bob
Thanks for your reply, I have contacted unitracts, have sent in pics of where retracts will go, have oleo's and mounts only need frames, that was over 2 months ago, never recieved a reply,
NOT IMPRESSED

[Robin Woodhead]

Have you tried Premia Retracts?

[Alan Cantwell 1131]

Try these, for the nijhuise 72" lancaster http://www.tonynijhuisdesigns.co.uk/Ret ... ectric.htm

Check the oleo length, it may be that the company that makes them may do you a bespoke set, the lanc is 72 inch,but the wrong scale for your mossy, please tell them the LMA sent you

[Phil Clark]

Jack

Drop me an e-mail through to phil@fighteraces.co.uk if I can be of assistance........

My retract supplier CJM in the US offer a set of simple gear specifically for this model. Complete system of air up, air down units, twin oleo struts + complete air kit (valve, bottle, filler airline etc etc...).........price is £ 260.00 all in.

Phil

[Jack Kennedy]

Phil

Thanks for your post, mossie on back burner at the moment, now I know who to talk to

c u cosford

Jack