Page 1 of 1

Condolences To Robbie

Posted: July 17th, 2016, 3:29 pm
by Wayne Cox
Just like to send my thoughts to Robbie on the dad loss of a very nice plane.

All the best
Waynr

Re: Condolences To Robbie

Posted: July 17th, 2016, 5:26 pm
by Dave Berry 2911
Oh no! What's happened Wayne, it was OK when I left last night?
Dave B.

Re: Condolences To Robbie

Posted: July 17th, 2016, 6:12 pm
by robbieskipton
Well as you know Dad and I are quite anal about our preparation. but on this occasion a £6 spark plug let me down. you just don't expect one to unwind itself still on the plug cap and hanging there out of the engine. I hadn't had any warning or any problems up to that point. Flight was all OK then all of a sudden i lost all power no real options as i was going down wind. She began to stall so flew away from crowd line, I tried to turn it well the other side of runway to land but in she came. Quite a bang. No damage to prop, engine or electronics on inspection only the plug hanging out on ht cable. But air frame is in a skip. I have to be pragmatic, i've had a good run for 6 years without loss, it had to happen sometime. The engine will be hanging on another Bipe by Christmas. Thank you for all support shown today it was very humbling.

Re: Condolences To Robbie

Posted: July 17th, 2016, 6:19 pm
by Dave Berry 2911
Sorry to hear that Robbie :cry:
I suppose the only consolation is that you know what caused it and no one else was involved.
Dave B.

Re: Condolences To Robbie

Posted: July 17th, 2016, 7:54 pm
by Wayne Cox
Hi Robbie
I now we spoke on the field and as you say it's nice when fellow modellers show their feelings when anyone's models goes in I know you will bounce back.

Wayne