Page 1 of 1
Carf P 47 Moki 250
Posted: June 10th, 2017, 6:33 pm
by Robert White
Hi Everyone,
Have just fitted the Moki and wish to link a servo to the choke lever. Has anyone done this? If so, any chance of some pictures or guidance?
Thanks for any help
Bob
Re: Carf P 47 Moki 250
Posted: June 11th, 2017, 8:50 am
by David Jones
Hi Robert, check out my build thread for the 1/4 scale Sea Fury, (page 1 of your new projects, item no 5). There are some pics of my throttle and choke servo installation about half way down page 5. David Jones.
Re: Carf P 47 Moki 250
Posted: June 11th, 2017, 1:57 pm
by Robert White
Thanks David. That's helpful
Regards
Bob
Re: Carf P 47 Moki 250
Posted: June 11th, 2017, 3:44 pm
by BRIAN RAWCLIFFE
Robert, two pics showing the installation of the choke servo on my Hawker Tempest MK 11. 150cc radial. Hope this helps.,Brian
ps . If this is your first radial powered warbird, you are in for a treat..
Re: Carf P 47 Moki 250
Posted: June 11th, 2017, 7:02 pm
by Robert White
Thanks Brian,
This is roughly how I ended up doing it except that with the P47 access is a bit limited to say the least. Yes it is my first and I'm very much looking forward to getting it into the air and listening to that amazing sound!
Thanks for the help
regards
Bob