silencing

Any topic that is not suitable for the other topic items
paul hughes
Posts: 276
Joined: December 8th, 2008, 8:10 pm
Contact:

silencing

Postby paul hughes » June 9th, 2018, 7:01 pm

I have a twin cylinder engine which is a bit noisy. It has 2 exhaust canisters bolted directly to the heads, there is no silencing in the cans and the exhaust gas goes straight through. Is it possible to add something to baffle the noise. Thanks

Mike Ellis
Posts: 229
Joined: January 15th, 2009, 7:37 pm
Location: Evesham
Contact:

Re: silencing

Postby Mike Ellis » June 9th, 2018, 7:51 pm

Hi Paul
There will be an article on the sid king silencer coming in the LMA journal shortly. These will definitely work to make your engine a lot quieter.
If you want a copy, I can email it to you before the journal comes out.

paul hughes
Posts: 276
Joined: December 8th, 2008, 8:10 pm
Contact:

Re: silencing

Postby paul hughes » June 9th, 2018, 10:25 pm

Thanks Mike, that would be a help if you could email.

Alan Cantwell 1131
Posts: 1655
Joined: June 15th, 2009, 8:21 pm
Contact:

Re: silencing

Postby Alan Cantwell 1131 » June 10th, 2018, 5:07 am

Ally pan scourer the guys use, Spontex I think it’s called? shove it into the silencer outlet, packed in, it takes the bark out of the sound,
Last edited by Alan Cantwell 1131 on June 12th, 2018, 4:21 pm, edited 1 time in total.

paul hughes
Posts: 276
Joined: December 8th, 2008, 8:10 pm
Contact:

Re: silencing

Postby paul hughes » June 12th, 2018, 10:28 am

Mike, did you send the article?

Paul Savage 1568
Posts: 103
Joined: January 16th, 2009, 2:19 pm
Contact:

Re: silencing

Postby Paul Savage 1568 » June 16th, 2018, 9:49 pm

Could take a look at these from Morrisminimotors. Either copy and paste the item number below into ebay search bar or copy and paste the address into your browser.

172508020085

https://www.ebay.co.uk/itm/DLE-RCGF-OS- ... Swr~lYnKAE

Mike Ellis
Posts: 229
Joined: January 15th, 2009, 7:37 pm
Location: Evesham
Contact:

Re: silencing

Postby Mike Ellis » June 16th, 2018, 11:41 pm

The difference between a piece of silicone tubing and a gizmo inside it compared to a properly designed item that is based on a gun silencer is like chalk and cheese lol
Sid Kings design is well proven AND IT WORKS.

Bob Thompson1894
Posts: 917
Joined: December 6th, 2008, 1:08 pm
Location: Notts
Contact:

Re: silencing

Postby Bob Thompson1894 » June 17th, 2018, 8:14 am

Mike Ellis wrote:The difference between a piece of silicone tubing and a gizmo inside it compared to a properly designed item that is based on a gun silencer is like chalk and cheese lol
Sid Kings design is well proven AND IT WORKS.

May be, but anything that takes the harsh bite from a DLE engine is to welcomed.

Stuart Mackay
Posts: 15
Joined: September 15th, 2009, 3:06 pm
Location: East Anglia
Contact:

Re: silencing

Postby Stuart Mackay » August 12th, 2018, 5:41 pm

Fit Krumscheid cans or tuned pipes! You have heard the 90 twin in the Jodel. We can do you a silver solder manifold sections to suit to suit, Paul!
http://www.moki.co.uk telephone 07785 926158


Return to “General Discussion Topics”

Who is online

Users browsing this forum: No registered users and 12 guests