Page 1 of 1
Zenoha 38 -zenoha 45
Posted: February 3rd, 2020, 10:24 pm
by wayne owen
Evening guys
Just a quick one if poss, the mounting holes on a zenoha 38 is 60mm apart ,question is the 45cc mounting plate is it the same or 65mm apart? Thanks in advance
Regards and happy landings
Re: Zenoha 38 -zenoha 45
Posted: February 6th, 2020, 12:59 pm
by Dave Kellett
Hi Wayne, in response to your query. Try looking at the 'Toni Clark' practical scale web site or try Phil Clark at 'Fighteraces'
Regards
Dave
Re: Zenoha 38 -zenoha 45
Posted: February 6th, 2020, 2:58 pm
by Bob Thompson1894
Re: Zenoha 38 -zenoha 45
Posted: February 6th, 2020, 6:43 pm
by Alan Cantwell 1131
Sorry, forgot about this, I take it you mean the actual mount the engine to the bulkhead holes, not the mount to the engine holes, which are differant,
Re: Zenoha 38 -zenoha 45
Posted: February 7th, 2020, 9:26 pm
by wayne owen
Hi all
Thanks for dropping a line, the mounts on my 38s look different for sure , the wholes on the mount plate that bolts to bulkhead are 60mm apart on the 38cc zenoha ,basically I was wondering if the 45cc was 60mm the same as the 38 or 65mm ? Before anybody ask don’t or I’ll bore you all to death
thanks in advance