1/3 SCALE Dr1

Why not share your information on your latest creation
david clarke
Posts: 225
Joined: June 2nd, 2010, 7:09 am
Contact:

1/3 SCALE Dr1

Postby david clarke » May 23rd, 2012, 7:19 pm

Hello all just thought i would post my latest project,it's built from my own plans not exact scale but i think very convincing.It spans 94" powered by a Zenoah 62.I started drawing the plans about 2 months ago which took a couple of weeks and it took 6 weeks to build the model.The aim of the project was an easy to build,easy to assemble and easy to fly model.As of today all three have come to fruition and it is an absolute dream to fly.It is all convetional structure covered in solartex and painted with cellulose paint,the engine proved to be more than ample easily flying round on 1/4 throttle but it is only 26.5 lb.Next one is a 1/3 scale SE5A plans are nearly complete but other commitments mean i can't get started on the build for a few months,i'll keep you posted.Cheers,Dave.
Attachments
006.JPG
006.JPG (74.3 KiB) Viewed 13352 times
007.JPG
007.JPG (69.74 KiB) Viewed 13352 times
009.JPG
009.JPG (71.97 KiB) Viewed 13352 times
005.JPG
005.JPG (61.52 KiB) Viewed 13352 times
004.JPG
004.JPG (66.5 KiB) Viewed 13352 times
002.JPG
002.JPG (83.66 KiB) Viewed 13352 times
Optimized-DSC_0064.JPG
Optimized-DSC_0064.JPG (39.39 KiB) Viewed 13352 times
Optimized-DSC_0078.JPG
Optimized-DSC_0078.JPG (13.84 KiB) Viewed 13352 times
Optimized-DSC_0089.JPG
Optimized-DSC_0089.JPG (12.84 KiB) Viewed 13352 times
Optimized-DSC_0079 (1).JPG
Optimized-DSC_0079 (1).JPG (12.48 KiB) Viewed 13274 times
Last edited by david clarke on May 24th, 2012, 6:29 am, edited 1 time in total.

User avatar
geoff dales
Posts: 14
Joined: December 4th, 2008, 7:51 pm
Location: scunthorpe
Contact:

Re: 1/3 SCALE Dr1

Postby geoff dales » May 23rd, 2012, 8:05 pm

that looks absolutely fantastic. Any plans on publishing the plans
LMA 3141

chris willis
Posts: 515
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 1/3 SCALE Dr1

Postby chris willis » May 23rd, 2012, 8:39 pm

Fantastic, well done, can't believe you did this so quick.
Chris

david clarke
Posts: 225
Joined: June 2nd, 2010, 7:09 am
Contact:

Re: 1/3 SCALE Dr1

Postby david clarke » May 23rd, 2012, 9:05 pm

geoff dales wrote:that looks absolutely fantastic. Any plans on publishing the plans

Maybe not decided yet,thought of plans and a semi kit,ribs formers cowl and wheels.I am hoping to do the Dr1,SE5A,DV11 and a Camel and who knows after that.
Cheers,Dave.

frank fearn
Posts: 131
Joined: February 21st, 2012, 5:58 pm
Location: Englander
Contact:

Re: 1/3 SCALE Dr1

Postby frank fearn » May 24th, 2012, 7:46 pm

I have some vid of the articulated pilot, rudder pedals and control coloumn, which I will upload over the weekend, very nice....

The pics I have taken don't really do her justice, shes a stunner. Obviously I witnessed the rigging and maiden flight, she was assembled and flying in less than 15 mins. Not really a ww1 type fella, but seeing this has altered my thoughts..

Alan Cantwell 1131
Posts: 1661
Joined: June 15th, 2009, 8:21 pm
Contact:

Re: 1/3 SCALE Dr1

Postby Alan Cantwell 1131 » May 24th, 2012, 8:27 pm

A uk source for 1/3rd ww1? manner from heaven, i would love a DR1 :D How scale will the outlines be?

david clarke
Posts: 225
Joined: June 2nd, 2010, 7:09 am
Contact:

Re: 1/3 SCALE Dr1

Postby david clarke » May 24th, 2012, 8:41 pm

Alan Cantwell 1131 wrote:A uk source for 1/3rd ww1? manner from heaven, i would love a DR1 :D How scale will the outlines be?

Hello Alan,the whole point of the project was ease of build and operation,the scale outline insn't that far away from scale,the wing section is totally none scale hence the superb flying qualities,but on a slow low flyby with the pilots scarf flapping in the breeze who cares.

Alan Cantwell 1131
Posts: 1661
Joined: June 15th, 2009, 8:21 pm
Contact:

Re: 1/3 SCALE Dr1

Postby Alan Cantwell 1131 » May 24th, 2012, 9:51 pm

sounds good to me,

Mike Booth
Posts: 648
Joined: December 4th, 2008, 5:51 pm
Contact:

Re: 1/3 SCALE Dr1

Postby Mike Booth » May 24th, 2012, 11:23 pm

Superb build and finish. This is just what the LMA
Is all about. Look forward to seeing it in the flesh.

stewart clifford
Posts: 590
Joined: January 25th, 2009, 10:04 am
Location: Weston , Hert's
Contact:

Re: 1/3 SCALE Dr1

Postby stewart clifford » May 25th, 2012, 8:23 am

david clarke wrote:
geoff dales wrote:that looks absolutely fantastic. Any plans on publishing the plans

Maybe not decided yet,thought of plans and a semi kit,ribs formers cowl and wheels.I am hoping to do the Dr1,SE5A,DV11 and a Camel and who knows after that.
Cheers,Dave.


That will be June's building taken care of :lol:

Very nice, I want one.

david clarke
Posts: 225
Joined: June 2nd, 2010, 7:09 am
Contact:

Re: 1/3 SCALE Dr1

Postby david clarke » May 25th, 2012, 11:53 am

stewart clifford wrote:
david clarke wrote:
geoff dales wrote:that looks absolutely fantastic. Any plans on publishing the plans

Maybe not decided yet,thought of plans and a semi kit,ribs formers cowl and wheels.I am hoping to do the Dr1,SE5A,DV11 and a Camel and who knows after that.
Cheers,Dave.


That will be June's building taken care of :lol:

Very nice, I want one.


Lmao,Cheers stewart :lol: :lol: :lol:

david clarke
Posts: 225
Joined: June 2nd, 2010, 7:09 am
Contact:

Re: 1/3 SCALE Dr1

Postby david clarke » May 25th, 2012, 6:21 pm

Here's the video of the control column moves as does the rudder bar.

http://www.youtube.com/watch?v=H64QzsSd ... r_embedded

david clarke
Posts: 225
Joined: June 2nd, 2010, 7:09 am
Contact:

Re: 1/3 SCALE Dr1

Postby david clarke » June 10th, 2012, 9:16 pm

Hello all,heres a couple of videos taken today a bit shakey in placec but watchable.I managed 7 flights what breeze there was was across the field so taking off and landing cross wind and it coped with it very well,inverted flight is amazingly hand off rolls loops spins all superb.

http://www.youtube.com/watch?v=z5FgjIei ... e=youtu.be

http://www.youtube.com/watch?v=U3F87JTS ... e=youtu.be

chris willis
Posts: 515
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 1/3 SCALE Dr1

Postby chris willis » June 10th, 2012, 9:44 pm

Well done David looks real good.

david clarke
Posts: 225
Joined: June 2nd, 2010, 7:09 am
Contact:

Re: 1/3 SCALE Dr1

Postby david clarke » June 10th, 2012, 10:28 pm

Cheers Chris,it's an absolute delight to fly i also thought it would be marginal on power,but it flies on less than 1/4 throttle.Dave :D :D

Alan Cantwell 1131
Posts: 1661
Joined: June 15th, 2009, 8:21 pm
Contact:

Re: 1/3 SCALE Dr1

Postby Alan Cantwell 1131 » June 11th, 2012, 6:53 am

ENOUGH, cant take any more!!!!!
Any thoughts on the semi kit???????? i am after building something this winter, its been a while, i was thinking of a WW11 bird, but this is much better, so, come on, peddle to the meddle,

david clarke
Posts: 225
Joined: June 2nd, 2010, 7:09 am
Contact:

Re: 1/3 SCALE Dr1

Postby david clarke » June 11th, 2012, 8:45 am

Alan Cantwell 1131 wrote:ENOUGH, cant take any more!!!!!
Any thoughts on the semi kit???????? i am after building something this winter, its been a while, i was thinking of a WW11 bird, but this is much better, so, come on, peddle to the meddle,


Be patient Alan,going to make a few mods, No1 smaller ailerons the ones that are on it are slightly oversize and are really powerfull,i am also going to make a more scale like uc with a slightly wider track and maybe suspention.As you know it all takes time.
Eventually i would like to manufacture full kit's,but it's very early days yet.
Cheers,Dave.
Last edited by david clarke on June 11th, 2012, 4:54 pm, edited 1 time in total.

User avatar
Dave Parry
Site Admin
Posts: 1078
Joined: November 27th, 2008, 10:39 pm
Location: St.Helens, Mersyside.
Contact:

Re: 1/3 SCALE Dr1

Postby Dave Parry » June 11th, 2012, 10:02 am

Well Done Dave, I see a good build article for the LMA Journal there, none of the Dawn Patrol has submitted anything on this era despite me asking which is a shame, but there you go.

Mark whiteley
Posts: 7
Joined: September 11th, 2009, 11:09 pm
Contact:

Re: 1/3 SCALE Dr1

Postby Mark whiteley » June 14th, 2012, 7:43 pm

Having seen this in the flesh today, i have to say its impressive
But wait till you see the SE5 which will be spectacular

Great job dave
Waiting for the kit


Mark. 3982

david clarke
Posts: 225
Joined: June 2nd, 2010, 7:09 am
Contact:

Re: 1/3 SCALE Dr1

Postby david clarke » June 21st, 2012, 7:48 pm

Hello,just a quick update as stated before the model flyes superb but it was hard work as soon as the wheels touched the deck.I got the scale drawing out and found that i had not mesured something quite right as the track was 3" too narrow,so i have made a new undercarriage with bunjee suspention,also making some new ailerons as the originals were very powerfull and a bit on the heavy side.Cheers,Dave.
Attachments
001.JPG
001.JPG (85.48 KiB) Viewed 12400 times


Return to “Your New Projects”

Who is online

Users browsing this forum: No registered users and 1 guest