ZDZ Reduction Drive

Why not share your information on your latest creation
Post Reply
David Brown
Posts: 403
Joined: November 10th, 2009, 8:24 pm
Location: Burton-on-Trent

ZDZ Reduction Drive

Postby David Brown » January 7th, 2016, 7:12 pm

Over Christmas I started a new project to help out a fellow LMA member with a big project in mind, to power this project he wanted to use the ZDZ 90 RV with a reduction drive. After a bit of head scratching we agreed on a new crankcase to carry the drive and keep it compact. This is the outcome, I am testing it on Polly V belts but will also trial the Gates G3 toothed belt set up.
You do not have the required permissions to view the files attached to this post.
Top
Nick Reeves 3055
Posts: 149
Joined: December 4th, 2008, 5:42 pm

Re: ZDZ Reduction Drive

Postby Nick Reeves 3055 » January 14th, 2016, 4:51 pm

hi david,
very impressed with this. i am considering a project that would (i think) require a 100-120cc with a reduction drive. ideally a drive that could be bolted on as opposed something like this. is this something you might be able to help with?
cheers
nick
Adreneline is a Natural substance, Enjoy it when you can!
Too many planks to count, & two helis all guided by Futaba
Top
David Brown
Posts: 403
Joined: November 10th, 2009, 8:24 pm
Location: Burton-on-Trent

Re: ZDZ Reduction Drive

Postby David Brown » January 15th, 2016, 7:35 am

Yes Nick, its just a case of selecting a suitable engine which will accept a bolt on structure. ZDZ have done it on the apposed twins and I am looking to fit one to their 210 in line.

Dave
Top
Post Reply

Return to “Your New Projects”

Who is online

Users browsing this forum: No registered users and 25 guests