Sky 120 LMA Trainer

[Bob Thompson1894]

Looking good Geoff, cracking idea using old magazines to weigh down the wing skins, never heard of that before.

Plastic bags full of sand works too.

[Geoff McVey]

Looking good Geoff, cracking idea using old magazines to weigh down the wing skins, never heard of that before.

Hi Paul,
Many thanks, seemed to do the job and worked well.

[Geoff McVey]

Sanding

Spent an hour today doing some light sanding on the right wing, working on where the sheet panels have been joined, they have almost disappeared after the sanding, just need a little more work on both LE and TE.


Bottom view of the right wing, again a little more sanding needed on both LE and TE.

[Geoff McVey]

The Titan ZG38 SC plus accessories should arrive tomorrow or Thursday so looking forward to that arriving, do a test fit with the engine mount and then to the firewall.

[David Berry]

Hi Geoff
Looking good.

[Geoff McVey]

Hi Geoff
Looking good.

Hi David,
Many thanks.

[Geoff McVey]

Box just delivered.

Just wondering what could be inside this box?

[Geoff McVey]

Unboxing Review.

On opening the box looks to be packed well, no movement inside where the contents inside could not easily move.


Again packaged well.
]

[Geoff McVey]

Unboxing Review

Contents of the box once most of the packaging have been removed.

[Geoff McVey]

Unboxing Review

ZG38 SC


Again packed very well.

[Geoff McVey]

Unboxing Review

ZG38 SC
Protected in a clear strong bag.

[Geoff McVey]

Unboxing Review

ZG38 SC
Side view.


Side view.


Top view.


Front view.


Clode up of Carb.

[Geoff McVey]

Unboxing Review

Steel Bowden cable with PTFE sleeve for carburettor hook up, 40cm.

[Geoff McVey]

Unboxing Review

Engine mount, plus parts.


Instructions.


Please note:

When mounting the motor mount on the Titan ZG 38, the enclosed washers between the motor mount and the motor must be inserted because of the eyes on the crankcase, otherwise the motor mount will deformed!

The four threaded holes extend into the crankcase. Therefore, give LOCTITE nut on the Allen screws! One drop is enough. Never inject the screw lock into the threaded hole!

The screws must not be screwed in more than 12 mm. Make sure that no foreign objects get into the engine.

Secure the motor mounts to the motor frame with M5 Allen screws, spring washers and serrated nuts.

Please correct any errors in the translation.

[Geoff McVey]

Unboxing Review

Fuel tank plus accessories.

[Geoff McVey]

Unboxing Review

1 Meter of fuel tubing.
[/url]IMG_2595

[Geoff McVey]

Unboxing Review

Cotton Felt Clunk Filfet, Intake Tube with Tufnol Flange.
[/url]IMG_2603

[Geoff McVey]

Unboxing Review

Ball Joints for M2 and M3, Tufnol Throttle arm d=3,9mm.

[Geoff McVey]

Test fitted the ZG38 SC to the engine mount, then test fitted to the firewall.

Right side view.


Left side view.


Front view.
]

Top view.


Another top view.


Bottom view.

[Geoff McVey]

Washers for the engine mount to the firewall a little on the large size, not sure if they need to be added or used.