Fuji-Imvac 86cc twin

Need technical help on some problem? Let us know and we will see what we can do
Post Reply
Hugh Grant mbe
Posts: 43
Joined: December 6th, 2008, 11:17 am
Contact:
Contact Hugh Grant mbe

Fuji-Imvac 86cc twin

Postby Hugh Grant mbe » February 14th, 2009, 8:11 pm

I want to reconfigure my Fuji twin to have a top or downdraught carb but with downward facing exhausts. I think you have to swap over the cylinders.If you have done this,please get in touch.
Steve Holland did this for Roger Bale some time ago. :? Does anyone have an Email address for Steve.
Top
Hugh Grant mbe
Posts: 43
Joined: December 6th, 2008, 11:17 am
Contact:
Contact Hugh Grant mbe

Re: Fuji-Imvac 86cc twin

Postby Hugh Grant mbe » February 16th, 2009, 10:38 am

Forget it guys, it cant be done the bolt down holes are offset to the locating spigot for transfer port purposes. So its on to plan B.
Cheers Hugh Grant LMA 3000
Top
Hugh Grant mbe
Posts: 43
Joined: December 6th, 2008, 11:17 am
Contact:
Contact Hugh Grant mbe

Re: Fuji-Imvac 86cc twin

Postby Hugh Grant mbe » March 2nd, 2009, 8:28 pm

I have reconfigured the exhaust mufflers by plugging the three small outlet pipes and brazing in a single pipe of the same area as these three. Works great.
Hugh Grant LMA 3000 :D :D
Top
Post Reply

Return to “Technical Help required”

Who is online

Users browsing this forum: No registered users and 9 guests