The peoples projects

[ian redshaw]

Full size Cri Cri?

Ian.

[Phil Clark]

Piper Tomahawk?

[Dave Hayfield]

Give Ian a cigar! Not full size, just 3/4 which will fit into the car by removing the tail section.

[dave tilbury]

airworld Me 262........just needs some minor things doing to it before maiden.....

nice kit goes together really well

[imghttp://www.rcscalebuilder.com/forum/uploads/tigermoth/images/2013-04-21_045536_m_P1050524.jpg][/img]

[Phil Clark]

Ziroli Corsair still progressing in the back ground.........surface detail on the wings is all complete, a few small jobs to do on the fuz and it's up for the same treatment.

Phil

[david clarke]

Very nice Phil,look forward to seeing the finished article.Been busy myself as usual,bought this Comp arf hawk for myself but have now decided to sell it.It came to me in the Display colour scheme with an awful lot of hangar rash some really bad,so the decision was made to totally refurb and repaint.The majority of the uc doors were also missing.The scheme chosen is to comemorate the 70th anniversery of the Spitfire,after looking at many schemes this one really jumped out at me.Now nearing completion it will be up for sale,i have all the maintanance marking from tailormade decals to fit,it is full of JR servos and carf retracts.

Cheers,Dave.


http://photos.plane-mad.com/8/large/8864.jpg

[Phil Clark]

Painting started on the Corsair.

Warbirdcolors 'US Sea Blue' thinned 25% with concentrated auto screen wash, applied with 0.6mm HVLP Iwata mini spray gun. 3 light coats giving excellent coverage with minimal paint used so the flush surface detail remains prominent so a wash should bring it all out later in the finishing process.

[Paul Williams]

Thought I would add a couple of photos of my latest build, Meister Corsair, but not blue or grey, Lucky Gallon was a 1946 Reno Race.

[sean smith]

Starting to look a bit more like a Mosquito now.

IMG_1666-1.jpg (132.64 KiB) Viewed 11632 times

IMG_1667-1.jpg (115.36 KiB) Viewed 11632 times

Sean.

[Phil Clark]

More little rings appearing on the Corsair fuz ..............

[Ken Bones]

Thought I would add a couple of photos of my latest build, Meister Corsair, but not blue or grey, Lucky Gallon was a 1946 Reno Race.

Nice one Paul.
For a first attempt at panal lines, rivets, dirt etc you have made a cracking job.
A brave move doing a warbird as a racer, perhaps some more will follow?
Bonzey

[RAY PETERS]

Does anyone have some pics and details of John Braithwaites big ZERO that under construction. Ozy

[Aaron norman]

Getting the with the la7 got the finally coat of primer on today then started on the Riverts hope to get the rest of the fuz done buy the end off the week the onto the wing
Cheers
Aaron

[sean smith]

OPINIONS PLEASE. Do you think the mini servo with 3Kg of torque will be man enough to open and close the bomb doors on my Mosquito? As can be seen from the photo's the doors open beyond the fuselage sides and you can't get a straight run at the door.

IMG_1793-1.jpg (94.04 KiB) Viewed 11215 times

IMG_1794-1.jpg (97.58 KiB) Viewed 11215 times

IMG_1795-1.jpg (92.58 KiB) Viewed 11215 times

IMG_1797-1.jpg (79.26 KiB) Viewed 11215 times

IMG_1798-1.jpg (101.56 KiB) Viewed 11215 times

[David Brown]

Hi Sean, try reversing your horn you are using to pull the door closed with. As you close the door the leverage gets less the way you have it, when it needs to be at its strongest, use all of the servo travel to get best out of your linkage and servo, keeping doors closed is harder than opening them due to air pressure in the fuzz when flying.

all the best Dave

[sean smith]

Hi David,
Thanks for the reply, i'll try re configuring things and see how it works out. I may try air rams but they may get in the way of the bomb-bay area i'll have to see. I have a small 2mm neodymium magnet in the rear of each door to help keep them closed.

IMG_1799-1.jpg (58.67 KiB) Viewed 11186 times

IMG_1800-1.jpg (61.19 KiB) Viewed 11186 times

Sean.

[dave tilbury]

http://www.rcmf.co.uk/RCMFLive/albums/userpics13100/m_P1050884.jpg

http://www.rcmf.co.uk/RCMFLive/albums/userpics13100/m_P1050883.jpg

[frank fearn]

Heres one I've had a round for a while, ...Vailly Typhoon with a Quadra 100, Back on the board after the Dauntless ...

Frank

[Aaron norman]

Getting there with the la7 not long now got all the litho plate bits done now to finish the office off before the front and back glazing gets glued on

[Phil Clark]

With surface detailing complete on the Corsair, last 2 major jobs before paint are renovating the retracts & fitting the tail wheels doors, plus cockpit interior & canopy.

Retracts were stripped, sand blasted, etch primed before being painted in Warbirdcolors US Sea Blue followed by a Klass Kote satin clear coat. A bit of time & effort but a big improvement over what I was supplied with.