New workshop

Why not share your information on your latest creation
jimlambert
Posts: 30
Joined: December 4th, 2008, 10:59 pm
Contact:

Re: New workshop

Postby jimlambert » July 2nd, 2013, 5:16 pm

That looks superb Ian ..... very nice indeed .... one suggestion, to save some money, rather than emptying your Hoover bag into the bin, use the fluffy hovering waste as loft insulation ....... I did this and saved almost £12 .....

ian redshaw
Posts: 217
Joined: December 4th, 2008, 7:13 pm
Contact:

Re: New workshop

Postby ian redshaw » July 2nd, 2013, 9:31 pm

Jim, filter out the nutritional bits and you could fatten up the breakfast hamster and save even more. Being a strict vegetarian, I simply fatten and sell on as I don't partake myself.

The pointless but likeable window is now in, complete with its original frame, though I couldn't save the beading. Boarded (most of) the tuther side of the partition and rooted out the intended double doors. These are 1940's jobbies and'll be great once painted again. My delivery of plasterboard didn't arrive today or I'd have boarded a bit more. Picked up the timber for the external doors, hopefully I can find enough old pitch pine here to plane up for boarding them, it'll last a lot better than the modern sh!te you buy today.

Ian.
Attachments
DSCF1277lma.jpg
DSCF1277lma.jpg (42.51 KiB) Viewed 12374 times
DSCF1279lma.jpg
DSCF1279lma.jpg (50.97 KiB) Viewed 12374 times
DSCF1283lma.jpg
DSCF1283lma.jpg (46.97 KiB) Viewed 12374 times

jimlambert
Posts: 30
Joined: December 4th, 2008, 10:59 pm
Contact:

Re: New workshop

Postby jimlambert » July 3rd, 2013, 4:37 pm

It's looking good mate .....

ian redshaw
Posts: 217
Joined: December 4th, 2008, 7:13 pm
Contact:

Re: New workshop

Postby ian redshaw » August 15th, 2013, 6:02 pm

Managed a few hours on the den today, taped the edges of the plasterboard, then plastered both me, a wall, a bit of ceiling and an awful lot of the floor, it was too bleeding hot, me a bit mardy and I'm a bit out of practice with this plastering malarky ;D ;D. The new workbench is just about perfect height for a plastering platform and is big enough to allow half the ceiling in one hit, winner!

The last pic is of me pleading to get back into the house ::)

Ian.
Attachments
DSCF1445lma.JPG
DSCF1445lma.JPG (34 KiB) Viewed 12175 times
DSCF1446lma.jpg
DSCF1446lma.jpg (47.78 KiB) Viewed 12175 times
lma1.jpg
lma1.jpg (39.16 KiB) Viewed 12175 times
lma.jpg
lma.jpg (109.05 KiB) Viewed 12175 times

ian redshaw
Posts: 217
Joined: December 4th, 2008, 7:13 pm
Contact:

Re: New workshop

Postby ian redshaw » August 16th, 2013, 4:46 pm

Got one of the big walls plastered this afty, and its the last of the plastering till the external doors are made and fitted. Once these doors are in, the adjacent walls can be finished. Its getting hard to work round stuff thats already found its way into the den!! This flying season is certainly curtailing progress somewhat!

Ian.
Attachments
DSCF1451lma.jpg
DSCF1451lma.jpg (59.42 KiB) Viewed 12112 times
DSCF1452lma.jpg
DSCF1452lma.jpg (61.63 KiB) Viewed 12112 times
DSCF1453lma.jpg
DSCF1453lma.jpg (41.97 KiB) Viewed 12112 times

Richard scarbrough
Posts: 58
Joined: December 4th, 2008, 11:36 pm
Contact:

Re: New workshop

Postby Richard scarbrough » August 17th, 2013, 4:48 pm

looking good Ian, look forward to seeing it completed and with models inside. Hope wilson does not see how you treat your company clothing!!!!! (38th fighter group) LOL. Least it was not one of my company shirts!!!
Richard.

User avatar
Denis Brown
Posts: 294
Joined: December 5th, 2008, 10:03 am
Location: Silksheen, Lincolnshire
Contact:

Re: New workshop

Postby Denis Brown » August 17th, 2013, 5:22 pm

2222 - Copy.jpg
2222 - Copy.jpg (79.15 KiB) Viewed 12053 times
Well Spotted Pike

stewart clifford
Posts: 590
Joined: January 25th, 2009, 10:04 am
Location: Weston , Hert's
Contact:

Re: New workshop

Postby stewart clifford » August 18th, 2013, 7:25 am

It does look like you've just staggered back from an all nighter

Alan Cantwell 1131
Posts: 1671
Joined: June 15th, 2009, 8:21 pm
Contact:

Re: New workshop

Postby Alan Cantwell 1131 » August 18th, 2013, 8:00 am

certainly looks well plastered :P

John Greenfield
Posts: 427
Joined: December 5th, 2008, 2:08 pm
Contact:

Re: New workshop

Postby John Greenfield » August 19th, 2013, 6:41 am

Nice looking Wellington in your workshop !!?

John

ian redshaw
Posts: 217
Joined: December 4th, 2008, 7:13 pm
Contact:

Re: New workshop

Postby ian redshaw » August 19th, 2013, 7:46 am

.....The blimmin' thing is in the way too!!!! A nice thing to have in the way though!!! A couple of good mates came round yesterday and helped me organise the chaos and plan the storage end. Space reduces rather quickly we found!

Ian.

ian redshaw
Posts: 217
Joined: December 4th, 2008, 7:13 pm
Contact:

Re: New workshop

Postby ian redshaw » August 19th, 2013, 8:34 am

stewart clifford wrote:It does look like you've just staggered back from an all nighter

Nah, they are generally much messier than that!!

ian redshaw
Posts: 217
Joined: December 4th, 2008, 7:13 pm
Contact:

Re: New workshop

Postby ian redshaw » September 5th, 2013, 6:27 pm

After some amount of hours, the new doors are clamped up and drying. Once dry, the tenons and stuff need lopping off and the draughtstrip grooves / rebates continuing through them need finishing. I'll cut the boards to size tonight hopefully so that the painting department can move in and prime/paint the bits you canny get to once theyre assembled. This highly skilled, fabulous team (ie, the missus and her mum) have been booked in at the weekend while I'm out toy planing it. I've got the upper hand though at the minute since she already has a lot of the doors and windows for her place, including a snazzy two piece door for when she gets an 'oss. NOT!!

Ian.
Attachments
DSCF1499lma.jpg
DSCF1499lma.jpg (82.01 KiB) Viewed 11808 times
DSCF1503lma.jpg
DSCF1503lma.jpg (62.48 KiB) Viewed 11808 times
DSCF1509lma.jpg
DSCF1509lma.jpg (65.89 KiB) Viewed 11808 times
DSCF1516lma.jpg
DSCF1516lma.jpg (81.27 KiB) Viewed 11808 times
DSCF1519lma.jpg
DSCF1519lma.jpg (55.18 KiB) Viewed 11808 times

Alan Alldritt
Posts: 13
Joined: September 29th, 2010, 6:46 pm
Contact:

Re: New workshop

Postby Alan Alldritt » September 6th, 2013, 4:49 pm

Hi Ian,
The doors look quite superb - with your obvious woodworking skills its a wonder that you haven't taken up aeromodeling ;) ;).
Having just rebuilt 4 very heavy wooden garage doors and replaced a side door might I suggest, if clearance allows, that you add rain drips to the bottom - mine had succumbed to the dreaded rot and not helped by a distinct lack of paint around the edges.They need not be so large to offend English heritage and your local planning authority (our house is also Grade 2 listed) but they now match the other external doors of the property.
Just my 2p worth.
ATB
Alan

ian redshaw
Posts: 217
Joined: December 4th, 2008, 7:13 pm
Contact:

Re: New workshop

Postby ian redshaw » September 10th, 2013, 3:44 pm

Cheers for that Alan, I'll certainly bear it in mind though current thinking is that the concrete floor will be cut back to be under the door, so the run off won't stand. The bottoms of the boards are already cut off at a slight angle. Had to have a look to see if they fit t'ole and to see how they match the old ones now the boarding is on. The doors now just need the tenons sorting etc. Ordered the furniture, need to make the frame, trim up the rough ar5e brickwork on one side and I'm hoping to get them in this weekend.

Ian.
Attachments
DSCF1546lma.jpg
DSCF1546lma.jpg (83.46 KiB) Viewed 11670 times
DSCF1547lma.jpg
DSCF1547lma.jpg (72.25 KiB) Viewed 11670 times

ian redshaw
Posts: 217
Joined: December 4th, 2008, 7:13 pm
Contact:

Re: New workshop

Postby ian redshaw » September 14th, 2013, 9:44 pm

The painting team sadly let me down and it wasn't till today the doors were given a couple of coats of primer, but I had to do one of them myself :o Machined up the frame timbers too, they're all primed up ready now too. On the plus side though, Jane's frames and doors were fitted today so more brownie points are in the bank. We also had a few maiden flights here today, mother Pea Hen took her youngsters up to the roof for some flying lessons! Aww bless.

Ah well, the 'board attachment quota has been reached' apparently, so your saved from more boring pics!!

Ian.

User avatar
Dave Parry
Site Admin
Posts: 1078
Joined: November 27th, 2008, 10:39 pm
Location: St.Helens, Mersyside.
Contact:

Re: New workshop

Postby Dave Parry » September 15th, 2013, 9:15 am

ian redshaw wrote:
Ah well, the 'board attachment quota has been reached' apparently, so your saved from more boring pics!!

Ian.


:o :shock: :? Try again Ian.

ian redshaw
Posts: 217
Joined: December 4th, 2008, 7:13 pm
Contact:

Re: New workshop

Postby ian redshaw » September 24th, 2013, 9:50 pm

Took the plunge and removed the up and over door, then ripped out the old frame etc. Squared up the hole a bit then fitted the new frame and doors. Lots to do yet, locks, seals, latches etc, but quite pleased to get the guts of it installed , even if I didn't get round to clearing up!!

Ian.
Attachments
DSCF1548lma.jpg
DSCF1548lma.jpg (45.74 KiB) Viewed 11439 times
DSCF1552lma.jpg
DSCF1552lma.jpg (46.49 KiB) Viewed 11439 times
DSCF1642lma.jpg
DSCF1642lma.jpg (78.9 KiB) Viewed 11439 times
DSCF1641lma.jpg
DSCF1641lma.jpg (85.07 KiB) Viewed 11439 times
DSCF1632lma.jpg
DSCF1632lma.jpg (72.84 KiB) Viewed 11439 times

User avatar
Denis Brown
Posts: 294
Joined: December 5th, 2008, 10:03 am
Location: Silksheen, Lincolnshire
Contact:

Re: New workshop

Postby Denis Brown » September 24th, 2013, 10:38 pm

Love the peacocks, we had severeal at one time but was requested to get rid of them because of the very nearby chicken farm. Wonderful but noisy creatures

ian redshaw
Posts: 217
Joined: December 4th, 2008, 7:13 pm
Contact:

Re: New workshop

Postby ian redshaw » September 28th, 2013, 5:59 pm

Managed a good half day in my den today, all battened and boxed in above the door, air line run through with some solid timber mountings for the regulators. Above the door the insulation is all fibreglass so the boxing was built allowing for the thickness of insulation etc. Hopefully get some boards on later ready for a week of evening plastering :D :D

Ian.
Attachments
DSCF1661lma.jpg
DSCF1661lma.jpg (70.78 KiB) Viewed 11375 times
DSCF1663lma.jpg
DSCF1663lma.jpg (70.66 KiB) Viewed 11375 times
DSCF1665lma.jpg
DSCF1665lma.jpg (70.29 KiB) Viewed 11375 times


Return to “Your New Projects”

Who is online

Users browsing this forum: No registered users and 16 guests