elevater

[peter houlden]

Hi any help with setting up pull pull with wire to elevater .u

[Alan Cantwell 1131]

What model? Size etc, A lot of folk have their fav ideas,

[peter houlden]

Hi Alan,the model is 1/4 scale Fokker d/8 balsa usa .

[peter houlden]

Hi Alan, model is 1/4 scale Fokker d/8 balsa usa kit

[Bob Thompson1894]

This what you need? Most model shops sell kits for this, but its easy enough to make your own from Fishing trace.

CLOSEDLOOP2.jpg (33.78 KiB) Viewed 8052 times

[peter houlden]

Hi Bob, thanks for the drawing but I want to use 4 control horns.One each side of the rudder on top of elevater.Then one each side of rudder under elevater. How would I connect 4 traces to the servo?

[Rob Buckley]

You'd be better off using 2 elevator servos, and controlling each elevator from one servo

http://data3.primeportal.net/hangar/bill_spidle3/fokker_dviii_nx94100/images/fokker_dviii_nx94100_30_of_51.jpg

[Alan Cantwell 1131]

http://www.collectors-edition.de/f-t-s_ ... nglish.htm

Heres a full size repro, there are some horn shots down the page, thing is with ww11 subjects, its hard to get the horns right, Contact Ceejay, of the Dawn Patrol, he makes things like that for 1/3rd scalers,

[Bob Thompson1894]

No, you need a servo for each side if you go the pull-pull route.

[peter houlden]

Hi All, thanks for all the info will take everything on board great site for help.