Well Iv not exactly been sat on my hands these last few weeks, but looking at ways of operating the Intercooler Doors on the P-47
Now I have listened to what you have all said in every regard, particularly with weight,
So....!
I decided to make and trial a mock set of doors and so far so good..
In terms of weight the both sides weigh less than a cheep plastic geared servo 40 gram or so, Iv have sent it off to be evaluated as to whether or not it could be put in to production with a little refinement. the Rail would be routed so it would have a smoother travel and to be cut from a harder more long lasting material and if possible even lighter...
So for now enjoy the photos and more to come when the finished item hopefully returns home to me ...
- P1010050 (800x600).jpg (95.69 KiB) Viewed 5996 times
- P1010047 (800x600).jpg (104.86 KiB) Viewed 5996 times
- P1010048 (800x600).jpg (101.83 KiB) Viewed 5996 times
- P1010049 (800x600).jpg (108.65 KiB) Viewed 5996 times
- P1010051 (800x600).jpg (104.91 KiB) Viewed 5996 times
- P1010052 (800x600).jpg (101.19 KiB) Viewed 5996 times
This is a sample shot of the rail as I was working it all out in my head....
Or trying.....
- P1010053 (800x600).jpg (138.68 KiB) Viewed 5996 times
So hopefully it will look something like this when fully finished....
- P1010054 (800x600).jpg (113.66 KiB) Viewed 5996 times
