Sky 120 LMA Trainer

[Geoff McVey]

Fuselage Step 11

T nuts ready to be epoxy to part F20 to secure the wing.


T nuts epoxy to F20 and cleaned up a little


Side view of part F20.

[Geoff McVey]

Fuselage Step 11

T nuts ready for epoxy to part F13 engine firewall.


Rear view of F13 engine firewall, T nuts epoxy and cleaned.


Front view of F13 engine firewall T nuts epoxy and cleaned.

[Geoff McVey]

Fuselage Step 2

Part F3 glued in place to F1, and set at 90 degree angle.

[Geoff McVey]

Fuselage Step 3

Part F4 glued in place to F1, and set at 90 degree angle.

[Geoff McVey]

Fuselage Step 7

Part F6 glued in place to F1, and set at 90 degree angle.

[Geoff McVey]

Fuselage Step 12

Fuselage side parts F7, F8, dry test fit and fit well together to parts F3, F4, F5, F6.

[Geoff McVey]

Fuselage Step 15

Parts F9, F10, dry test fitted then glued in place.

[Dave Parry]

Looking good Geoff, keep up the good work.

[Geoff McVey]

Looking good Geoff, keep up the good work.

Hi Dave,
Many thanks.

[Geoff McVey]

Fuselage Step 13

Part F20 glued in place, then parts F21 glued to lock F20, T nuts already epoxy before fitting part F20.

[Geoff McVey]

Fuselage Step 14

Firewall F13 glued in place, then parts MF1 glued to support F13 firewall.


Parts MF1 trimmed.

[Geoff McVey]

Fuselage Step 17

Parts F25 glued in place to support U/C.

[Geoff McVey]

U/C Part 1

Bolts, T nuts test fitted in place, bottom view.


Bolts, T nuts test fitted in place, top view.


Bolts, T nuts test fitted in place, side view.

[Geoff McVey]

U/C Part 2

Holes drilled on part F26 fuselage bottom skin.


Holes drilled on parts F25.


Dry test fit of U/C with holes drilled, all lined up correctly, no issues.

[Geoff McVey]

Fuselage Step 18

Part F26 glued in place.


Once glued U/C bolts added to help keep down and no movement.


Masking tape added to keep the rest of part F26 from moving.

[Geoff McVey]

View from inside the fuselage, some light sanding needed.

[Bob Thompson1894]

nice neat work. Carry on.....

[Geoff McVey]

nice neat work. Carry on.....

Hi Bob,
Many thanks.

[stuart knowles 1611]

It all looks a bit 'Brick Outhouse' but having seen them fly, it must be fine.
Neat building, keep posting

[Geoff McVey]

It all looks a bit 'Brick Outhouse' but having seen them fly, it must be fine.
Neat building, keep posting

Hi Stuart,

Thank you, will keep posting.