Meister P47D Refurbishment

Why not share your information on your latest creation
Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » December 15th, 2010, 12:00 am

And finally for now, the cowl which has been panel lined and had some metal tape straps added
Attachments
5.jpg
5.jpg (61.3 KiB) Viewed 11870 times

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » December 15th, 2010, 12:13 am

Can't do any more on it now till the weather allows some primer to go on!!

stewart clifford
Posts: 590
Joined: January 25th, 2009, 10:04 am
Location: Weston , Hert's
Contact:

Re: Meister P47D Refurbishment

Postby stewart clifford » December 15th, 2010, 12:20 am

Those metal tapes on the flappy bits look posh, I'll have to persuade Mr White to get some of those, are they the ones Meister supplies?

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » December 15th, 2010, 12:23 am

Nope, they are cut by hand from a standard roll of metal tape

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » December 19th, 2010, 9:23 pm

Gonna give a meister cockpit a go on the refurb. It arrived yesterday along with a bag of bits and pieces too.
Attachments
11.jpg
11.jpg (56.92 KiB) Viewed 11824 times

Mike Booth
Posts: 648
Joined: December 4th, 2008, 5:51 pm
Contact:

Re: Meister P47D Refurbishment

Postby Mike Booth » December 20th, 2010, 12:42 am

Gregg Veasey wrote:Can't do any more on it now till the weather allows some primer to go on!!


Nar , just blow the thing over and get it back in the warm.

Happy Christmas to all Veasey's.
Mike.

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » December 27th, 2010, 11:04 pm

The 3 outlets were a bit of a mess but I didn't know how best to neaten them. Thankfully the smart a*se Veasey elder had one of his bright ideas! Once the edges are filled and paint is applied they should look pretty good/neat
Attachments
15.jpg
15.jpg (118.53 KiB) Viewed 11745 times
12.jpg
12.jpg (100.04 KiB) Viewed 11745 times
13.jpg
13.jpg (81.08 KiB) Viewed 11745 times
14.jpg
14.jpg (93.82 KiB) Viewed 11745 times

Ken Bones

Re: Meister P47D Refurbishment

Postby Ken Bones » December 28th, 2010, 11:40 pm

Gregg, as you say, ''smart a*se'' :)
Nice one Mr Vease The Elder.

Bonzey

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » January 16th, 2011, 7:33 pm

They blended in pretty well!
Attachments
19.jpg
19.jpg (90.44 KiB) Viewed 11596 times

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » January 16th, 2011, 7:35 pm

Have done some work on the cockpit too. Because its being retro fitted I've had to cut the pieces about quite a bit to get them in but its coming on
Attachments
28.jpg
28.jpg (78.66 KiB) Viewed 11596 times
32.jpg
32.jpg (78.27 KiB) Viewed 11596 times
34.jpg
34.jpg (97.4 KiB) Viewed 11596 times

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: Meister P47D Refurbishment

Postby chris willis » January 16th, 2011, 7:51 pm

Looking good Gregg

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » January 16th, 2011, 11:02 pm

Sorry to continue to hijack your thread Stewart, how you getting on with Steve's. Will it be ready for this coming season?

stewart clifford
Posts: 590
Joined: January 25th, 2009, 10:04 am
Location: Weston , Hert's
Contact:

Re: Meister P47D Refurbishment

Postby stewart clifford » January 16th, 2011, 11:52 pm

Thats ok Gregg, you carry on. Steves will be ready for this season, I'm just working on it as and when, between other things, should be on it properly in early Feb. The paint masks arrived from Flightline Graphics last week, just got one wing to finish priming then I will be adding a bit of surface detail before it's painted.
I like the vents might have to copy that too :D

Cheers

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » January 19th, 2011, 11:06 pm

Started painting the cockpit parts. Still lots to do to them before sticking them in but it doesn't look too bad already.
Attachments
38.jpg
38.jpg (84.69 KiB) Viewed 11536 times
39.jpg
39.jpg (82.44 KiB) Viewed 11536 times
42.jpg
42.jpg (81.46 KiB) Viewed 11536 times

Ken Bones

Re: Meister P47D Refurbishment

Postby Ken Bones » January 20th, 2011, 10:27 am

Hi all, I have sat in a P47, its huge! whilst you sit there you could put a suit case either side of you and go on holiday. :)
I have had the chance to sit in quite a few warbirds, Spit, Hurri, P40,P51, 109, 190, all the cats, F4u. And some more, but none of them had the space of a P47.

Bonzey

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » January 20th, 2011, 10:43 am

Is that your way of picking faults in my model Mr B! :cry:

I am aware that the pilot is too big for the model.....and he's cracking up quite a bit.....but he's been in there for 10 years+ so he deserves to stay there

Ken Bones

Re: Meister P47D Refurbishment

Postby Ken Bones » January 20th, 2011, 12:11 pm

Gregg Veasey wrote:Is that your way of picking faults in my model Mr B! :cry:

I am aware that the pilot is too big for the model.....and he's cracking up quite a bit.....but he's been in there for 10 years+ so he deserves to stay there



Sorry mate, I spose I should of said in my last post, It is looking great. I was not picking faults tho. kiss and make up smiley!

Bonzey

stewart clifford
Posts: 590
Joined: January 25th, 2009, 10:04 am
Location: Weston , Hert's
Contact:

Re: Meister P47D Refurbishment

Postby stewart clifford » January 20th, 2011, 12:21 pm

He's right you can run around in a P47 cockpit, Wildcats the same, need to make your pilot look forward Gregg or he could have a nasty accident :lol:

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » January 20th, 2011, 12:51 pm

Nah, leave the poor old bugger alone you orrible lot!

Besides, nobody has commented on it in the last 10 years :?:

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: Meister P47D Refurbishment

Postby Gregg Veasey » January 20th, 2011, 1:38 pm

Ken Bones wrote:
Sorry mate, I spose I should of said in my last post, It is looking great. I was not picking faults tho. kiss and make up smiley!

Bonzey



I :D :D

Because of all the hacking about I've had to do to squeeze the cockpit kit in, I wasn't particularly confident in how it would turn out. However, just with a bit of paint added its starting to look pretty good I think. Once the lid goes on it should look even better.

I also totally agree that the poor old bugger is too big. Anyone got a decent pilot they want to part with? Assuming not, the jolly brown giant will have to do


Return to “Your New Projects”

Who is online

Users browsing this forum: No registered users and 23 guests