!/3 Pitts S2a Build

Why not share your information on your latest creation
Post Reply
Stuart Palmer
Posts: 28
Joined: February 2nd, 2011, 8:38 pm
Contact:
Contact Stuart Palmer

Re: !/3 Pitts S2a Build

Postby Stuart Palmer » February 18th, 2011, 5:19 pm

Nice work, I'm building a 30% Pitts Special at the moment as a prototype or practice for a 50% version in the future.
The 50% version is on the CAD table at the moment but the 30% had some of it's paint this week. Must try to arrange some photos for on here.
Many thanks

Stuart
_________________________________________________________________________
http://www.thedebtexpert.co.uk
Top
Dave Wood
Posts: 22
Joined: January 13th, 2010, 2:45 pm
Contact:
Contact Dave Wood

Re: !/3 Pitts S2a Build

Postby Dave Wood » February 27th, 2011, 7:37 pm

Hi Everyone,
I'm afraid I'd lost enthusiasm during the summer and had too many projects on the go.
The model is far from finished but I've just started back on the build, just joined the top wing panels. I'll put some pics up as soon as I get some worth uploading.
Still looking for a suitable engine though, I'd really like to put a twin up front to keep the vibration down to a minimum.
Dave.
Dave Wood. 3173
AKA Woodwings.
Top
Dave Wood
Posts: 22
Joined: January 13th, 2010, 2:45 pm
Contact:
Contact Dave Wood

Re: !/3 Pitts S2a Build

Postby Dave Wood » March 18th, 2011, 8:28 pm

Some more pics.
Attachments
31. Joining Upper Wing Panels.jpg
Joining Upper Wing Panels
31. Joining Upper Wing Panels.jpg (51.55 KiB) Viewed 12407 times
32. Joining Upper Wing Panels.jpg
32. Joining Upper Wing Panels.jpg (44.91 KiB) Viewed 12407 times
33. Cabane Strut Mounting Point Plates.jpg
Adding the Cabane Strut Mounting Plates.
33. Cabane Strut Mounting Point Plates.jpg (48.91 KiB) Viewed 12407 times
34. Cabane Strut Mounting Point Plates.jpg
34. Cabane Strut Mounting Point Plates.jpg (49.72 KiB) Viewed 12407 times
35. Top Wing Centre Section nearly completed..jpg
Upper Wing Centre Section Nearly Completed
35. Top Wing Centre Section nearly completed..jpg (44.41 KiB) Viewed 12407 times
Dave Wood. 3173
AKA Woodwings.
Top
Dave Wood
Posts: 22
Joined: January 13th, 2010, 2:45 pm
Contact:
Contact Dave Wood

Re: !/3 Pitts S2a Build

Postby Dave Wood » March 18th, 2011, 8:35 pm

Still joining wing panels!
Attachments
35a. Upper Wing Centre Section Top Sheeting. (Leading edge still to fit).jpg
Sheeting added to top of upper wing. (Leading edge still to fit)
35a. Upper Wing Centre Section Top Sheeting. (Leading edge still to fit).jpg (35.33 KiB) Viewed 12406 times
36. Joining Lower Wing Panels.jpg
Joining Lower Wing Panels
36. Joining Lower Wing Panels.jpg (44.21 KiB) Viewed 12406 times
37. Joining Lower Wing Panels.jpg
37. Joining Lower Wing Panels.jpg (48.43 KiB) Viewed 12406 times
Dave Wood. 3173
AKA Woodwings.
Top
Richard Sullivan
Posts: 28
Joined: December 9th, 2008, 2:02 pm
Location: Peterborough
Contact:
Contact Richard Sullivan

Re: !/3 Pitts S2a Build

Postby Richard Sullivan » March 19th, 2011, 3:23 pm

Looking good dave keep it up mate :) :)
Richard Sullivan LMA 3107
Top
Dave Wood
Posts: 22
Joined: January 13th, 2010, 2:45 pm
Contact:
Contact Dave Wood

Re: !/3 Pitts S2a Build

Postby Dave Wood » March 31st, 2011, 5:09 pm

Today I've just been checking the fit of wings and tail feathers, checking alignment of wings to fuselage, tailplane to wings, and marking the position of the interplane strut half ribs so I can get on with finishing sheeting of top and bottom wings.
Attachments
38. Assembly to Check Decalage, Position of Cabane and Interplane Struts..jpg
First fit assembly to check decalage.
38. Assembly to Check Decalage, Position of Cabane and Interplane Struts..jpg (41.65 KiB) Viewed 12274 times
39. Setting Tailplane to 0.0 Degrees.jpg
Setting the Tailplane to 0 degrees using a Wixey Digital Angle Finder to use as a comparitor.
39. Setting Tailplane to 0.0 Degrees.jpg (43.62 KiB) Viewed 12274 times
40. Setting Tailplane to 0.0 Degrees.jpg
40. Setting Tailplane to 0.0 Degrees.jpg (44.3 KiB) Viewed 12274 times
41. Checking Upper Wing Incidence Using Digital Angle Meter.jpg
Comparing the upper wing incidence to the tailplane.
41. Checking Upper Wing Incidence Using Digital Angle Meter.jpg (43.18 KiB) Viewed 12274 times
42. Checking Upper Wing Incidence Using Digital Angle Meter.jpg
42. Checking Upper Wing Incidence Using Digital Angle Meter.jpg (34.16 KiB) Viewed 12274 times
Dave Wood. 3173
AKA Woodwings.
Top
Dave Wood
Posts: 22
Joined: January 13th, 2010, 2:45 pm
Contact:
Contact Dave Wood

Re: !/3 Pitts S2a Build

Postby Dave Wood » March 31st, 2011, 5:17 pm

Checking fit cont'd.
Attachments
43. Checking Lower Wing Incidence.jpg
Comparing lower wing incidence to upper wing and tailplane.
43. Checking Lower Wing Incidence.jpg (37.24 KiB) Viewed 12274 times
44. Marking Position of Interplane Strut Half Ribs..jpg
Marking position of interplane strut half ribs.
44. Marking Position of Interplane Strut Half Ribs..jpg (43.1 KiB) Viewed 12274 times
45. Marking Position of Interplane Strut Half Ribs..jpg
45. Marking Position of Interplane Strut Half Ribs..jpg (41.62 KiB) Viewed 12274 times
46. Marking Position of Interplane Strut Half Ribs..jpg
46. Marking Position of Interplane Strut Half Ribs..jpg (42.47 KiB) Viewed 12274 times
Dave Wood. 3173
AKA Woodwings.
Top
stewart clifford
Posts: 590
Joined: January 25th, 2009, 10:04 am
Location: Weston , Hert's
Contact:
Contact stewart clifford

Re: !/3 Pitts S2a Build

Postby stewart clifford » April 13th, 2011, 10:43 pm

Looking really good, I want one too. What a nice building board seems a shame to stick pins in it.
Top
Dave Wood
Posts: 22
Joined: January 13th, 2010, 2:45 pm
Contact:
Contact Dave Wood

Re: !/3 Pitts S2a Build

Postby Dave Wood » May 1st, 2012, 5:50 pm

Enthused again, Flying wire - Landing wire wing fixings.
Attachments
47. Landing - Flying Wire Wing Plates Fitted. (Top view lower wing).jpg
Landing Wire , Flying Wire Fixing.
47. Landing - Flying Wire Wing Plates Fitted. (Top view lower wing).jpg (39.44 KiB) Viewed 11476 times
48. Landing - Flying Wire Wing Plates Fitted. (Underside view lower wing).jpg
48. Landing - Flying Wire Wing Plates Fitted. (Underside view lower wing).jpg (42.72 KiB) Viewed 11476 times
Dave Wood. 3173
AKA Woodwings.
Top
Dave Wood
Posts: 22
Joined: January 13th, 2010, 2:45 pm
Contact:
Contact Dave Wood

Re: !/3 Pitts S2a Build

Postby Dave Wood » May 1st, 2012, 6:01 pm

Interplane fixings Lower Wing.
Attachments
49. Interplane Strut Fixing (Lower Wing).jpg
49. Interplane Strut Fixing (Lower Wing).jpg (40.08 KiB) Viewed 11476 times
50. Interplane Strut Fixing (Lower Wing).jpg
50. Interplane Strut Fixing (Lower Wing).jpg (39.22 KiB) Viewed 11476 times
Dave Wood. 3173
AKA Woodwings.
Top
Dave Wood
Posts: 22
Joined: January 13th, 2010, 2:45 pm
Contact:
Contact Dave Wood

Re: !/3 Pitts S2a Build

Postby Dave Wood » June 26th, 2012, 10:16 pm

Fitting the Engine Bulkhead.
Attachments
51. Engine Bulkhead Fitted.jpg
Engine Bulkhead
51. Engine Bulkhead Fitted.jpg (40.87 KiB) Viewed 11239 times
52. Bottom View of Engine Bulkhead Fitting.jpg
Bottom View of Bulkhead
52. Bottom View of Engine Bulkhead Fitting.jpg (38.03 KiB) Viewed 11239 times
53. Checking Fit of Undercarriage..jpg
Check fit of undercarriage
53. Checking Fit of Undercarriage..jpg (41.55 KiB) Viewed 11239 times
Dave Wood. 3173
AKA Woodwings.
Top
User avatar
paul smith
Posts: 110
Joined: September 24th, 2011, 6:44 am
Contact:
Contact paul smith

Re: !/3 Pitts S2a Build

Postby paul smith » September 23rd, 2012, 7:58 pm

looking really nice ,very impressive build , keep it up :D
Top
Dave Wood
Posts: 22
Joined: January 13th, 2010, 2:45 pm
Contact:
Contact Dave Wood

Re: !/3 Pitts S2a Build

Postby Dave Wood » June 15th, 2013, 6:07 pm

Making a start on the cowling, drawing is not very good for this as the parts are made for purchase as a plan pack.
Still here goes!

55. Assembled Profile Jig for Making a Pattern.jpg
55. Assembled Profile Jig for Making a Pattern.jpg (37.22 KiB) Viewed 10335 times


56. Assembled Profile Jig for Making a Pattern.jpg
56. Assembled Profile Jig for Making a Pattern.jpg (34.74 KiB) Viewed 10335 times
Dave Wood. 3173
AKA Woodwings.
Top
Dave Wood
Posts: 22
Joined: January 13th, 2010, 2:45 pm
Contact:
Contact Dave Wood

Re: !/3 Pitts S2a Build

Postby Dave Wood » June 15th, 2013, 6:12 pm

57. Foam Block Rough Carved for Part of Cowl.jpg
57. Foam Block Rough Carved for Part of Cowl.jpg (37.86 KiB) Viewed 10335 times


59. Foam Blocks Rough Carved for Part of Cowl.jpg
59. Foam Blocks Rough Carved for Part of Cowl.jpg (35.85 KiB) Viewed 10335 times


60. Foam Blocks Rough Carved for Part of Cowl.jpg
60. Foam Blocks Rough Carved for Part of Cowl.jpg (34.31 KiB) Viewed 10335 times
Dave Wood. 3173
AKA Woodwings.
Top
Dave Wood
Posts: 22
Joined: January 13th, 2010, 2:45 pm
Contact:
Contact Dave Wood

Re: !/3 Pitts S2a Build

Postby Dave Wood » June 21st, 2013, 6:39 pm

All the pieces of foam added and rough sanded to form the plug for a mould.

63. Rough sanded plug for mould.jpg
63. Rough sanded plug for mould.jpg (35.51 KiB) Viewed 10276 times


64. Rough sanded plug for mould.jpg
64. Rough sanded plug for mould.jpg (32.69 KiB) Viewed 10276 times
Dave Wood. 3173
AKA Woodwings.
Top
Post Reply

Return to “Your New Projects”

Who is online

Users browsing this forum: No registered users and 19 guests