1/3 scale Balsa U.S.A.float kit

Post your sales or wanted list here
barry banks
Posts: 28
Joined: March 2nd, 2012, 8:02 pm
Contact:

1/3 scale Balsa U.S.A.float kit

Postby barry banks » June 26th, 2021, 9:26 pm

For sale :Balsa usa 1/3 scale float kit £150.00. . It was Bought from Pegasus models but never used. cost me £229.00 now as rare as hens' teeth. Picture of the completed ones are from the web Info From the web site: Our Ultimate Series 1/3 Scale float kit exactly duplicates Edo's 1400 series right down to the last fitting. Although the floats were designed for use on a J-3 Cub, they can be adapted for use on almost any 1/3 scale model. I.e.: Spacewalker , Beaver,Flybaby, etc. This kit includes all the exact scale details to make the floats really stand out from the rest on the water. The kits are absolutely complete with formed basswood struts, scale toe rails, chine stripes, scale rivet details, water rudder, and all the scale metal fittings needed to fit to your model. Interior construction is balsa, basswood, and plywood. The exterior of the kits is 1/32' aircraft grade plywood, which exactly duplicates the metal surfaces of the full-scale Edo floats. If you are looking for the finest, most accurate, exact scale float kit that is still very easy to build, our Edo float kits are for you. 1/3 Scale Edo Floats 59 inches in length. Will support models weighing up to 40 pound
Will be posted by Royalmail second class signed for cost £10.00.
155189710_3630765390355697_3820359976012954501_n.jpg
155189710_3630765390355697_3820359976012954501_n.jpg (379.37 KiB) Viewed 983 times
Attachments
155369938_3630765217022381_6014754399385916193_n.jpg
155369938_3630765217022381_6014754399385916193_n.jpg (405.34 KiB) Viewed 983 times

barry banks
Posts: 28
Joined: March 2nd, 2012, 8:02 pm
Contact:

Re: 1/3 scale Balsa U.S.A.float kit

Postby barry banks » June 30th, 2021, 7:43 am

now sold .thank you Tom!


Return to “For Sale or Wanted”

Who is online

Users browsing this forum: Taj Manning and 3 guests