ALUMINIUM BAR

Need technical help on some problem? Let us know and we will see what we can do
Post Reply
BRIAN RAWCLIFFE
Posts: 162
Joined: December 4th, 2008, 5:09 pm

ALUMINIUM BAR

Postby BRIAN RAWCLIFFE » February 23rd, 2011, 1:05 pm

Can anybody supply me with the following Aluminium bar, 22mm square x 50mm long if possible with a 16mm hole
bored through the length.Material only will be ok as if necessary i can do the bore myself.
I require two pieces for the job in hand,but if possible make it four then i will have two spares.Many thanks Brian..
Top
User avatar
John Evans
Posts: 155
Joined: December 4th, 2008, 7:02 pm

Re: ALUMINIUM BAR

Postby John Evans » February 23rd, 2011, 1:49 pm

Hi Brian
Try Forgale in heckmondwike. I have got all my plate and bar etc for making retracts. Near the Pondarosa not far from Morrisons.
john Evans
Top
BRIAN RAWCLIFFE
Posts: 162
Joined: December 4th, 2008, 5:09 pm

Re: ALUMINIUM BAR

Postby BRIAN RAWCLIFFE » February 23rd, 2011, 3:31 pm

John many thanks Forgale have in stock 7/8" square bar which is 22.5mm so i can reduce it on my belt sander.
Top
Post Reply

Return to “Technical Help required”

Who is online

Users browsing this forum: No registered users and 23 guests