Wiring & Electronics Installation

[Alan Bithrey]

I believe that Keith Mitchell has produced some information on wiring and electronics installations for large models.

Please can I have a copy Keith?

Thanks

Alan

[Simon Willey]

I would be very interested to read this as well

Simon

[Nick Reeves 3055]

i would be verying interested in this read as well

cheers

nick

[Keith Mitchell]

Gents - my booklet is downloadable and available only to bona fide LMA members.

PM me with your Memb. No. and Email add. and I'll send it to you.

Cheers,
Keith

[Alan Bithrey]

Info sent Keith.

[Gerard Jordan]

Novice seeking advice please. When the Ailerons are activated, there is a slight downward deflection of the elevator. It happens with both transmitters ( JR2610 and 347 ). The deflection is .25 inch from neutral position, at elevator traling edge. The servos sit side by side., .75 inch seperation. Is `mutual` inductance a possibility? There is no other visible reason or connection. 2610 manual says nothing, other than aileron/rudder mixing capability.
Response to forum checked daily or, e-mails <gerard.2@virgin.net> Thanks in advance.

[Gerard Jordan]

Forget request for aileron/elevator problem, aircraft crashed - destroyed!
gerard.2@virgin.net

[fred barlow]

hi keith email sent but forgot to put lma no on its 2796 thanks fred barlow